IF YOU HAVE READ YOUR INSTRUCTIONS AND STILL NEED ASSISTANCE, YOU MAY ACCESS OUR ONLINE HELP AT HTTP://WWW.MAGNAVOX.COM/SUPPORT OR CALL 1-800-605-8610 WHILE WITH YOUR PRODUCT. INSTRUCCIONES EN ESPANOL INCLUIDAS. © 2009 Funai Electric Co., Ltd. Recording Playback EditingIntroduction Connections Basic Setup Function VCR Functions Others Espanol For more info, please contact 1-800-605-8610 or visit : After all the connections are complete, connect the AC power cord. 1 2 4 5 3 Insert two Size AA (R6

This is a safety feature to prevent driver distraction. In-dash DVD video functions will only operate when vehicle is in Park and the parking brake is engaged. It is illegal in most states for the driver to view video while the vehicle is in motion. Copyright Notes This product incorporates copyright protection technology that is protected by method claims of certain U.S. patents and other intellectual property rights owned by Macrovision Corporation and other rights owners. Use of this copyrigh

Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove trim ring from unit, • Remove 2 transit screws located on top of the unit. • Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve. • Install mounting sleeve into opening, bending tabs to secure. • Connect wirin

In European frequency spacing mode, the clock will display 24-hour time (22:00). XDM6220 OPERATION General Operation Programmable Display Priority In tuner mode, press and hold DISP then press TUNE >> to select function priority display. “FREQ” will momentarily appear in the display. Note: "FUNC" will appear in CD or AUX modes. Radio frequency (tuner mode), CD track/elapsed time (CD mode) or AUX (AUX mode) will be displayed by default. Note: When playing MP3/WMA files, the track number/elapsed t

(consult a qualified technician for instructions) •Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove 2 transit screws located on top of the unit. • Remove trim ring by pulling up gently in the center. • Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve. • Install mounting sleeve into dash opening, bending t

Consult a qualified technician for instructions. • Avoid installing the unit where it would be subject to high temperatures, such as from direct sunlight, or where it would be subject to dust, dirt or excessive vibration. Getting Started • Remove 2 transit screws located on top of the unit. • Insert the supplied keys into the slots as shown, and slide the unit out of the mounting sleeve. • Install mounting sleeve into opening, bending tabs to secure. • Connect wiring harness and antenna. Consult

Determine the mounting location for the unit. 4. Drill holes for the self-tapping screws ( T5x12). 5. Install self- tapping screws to secure the CD changer to the metal. Installation (continua) Instalacion en Suspension 1. Asegurese que los resortes antivibracion esten colocados en la posicion " 0". 2. Adhiera el soporte (A) a cada lado de la unidad utilizando los tornillos de la maquina ( M4x5) . 3. Determine la ubicacion de montaje para la unidad. 4. Realice agujeros con el taladro para los to

Pressing and holding these buttons for more than a second changes the scanning speed (page 14). 9 ENGLISH Front panel display a u H *SA-CDVCD • DVD-AV I H DOWN MIX cDCH I MULTI] LSHs1_rRSirLFE n Disc type indicator Shows the type of disc currently loaded CD or SACD. Note: This display also lights when DVD video, DVD audio or Video CD discs are loaded (but playback of these types of discs is not possible with this unit). ^ REPEAT indicator Lights when repeat play mode is select

< Do not stick papers or protective sheets on the discs and do not use any protective coating spray. < Use a soft oil-based felt-tipped pen to write the information on the label side. Never use a ball-point or hard-tipped pen, as this may cause damage to the recorded side. < Never use a stabilizer. Using commercially available CD stabilizers with this unit will damage the mechanisms and cause them to malfunction. < Do not use irregular shape CDs (octagonal, heart shaped, business card size, etc.

WORD DAC LAYER (normal display) < If you leave the unit idle for 10 seconds, the setting mode will be cancelled. 2 Use the SKIP buttons (.//) to select the options within the menu item. 3 Individual menu functions are described on pages 17-18. Repeatedly press the MODE button until the display returns normal (or leave the unit idle for 10 seconds) to exit the setup mode. Pressing the STOP button also finishes the setup mode. < Switching off the power without exiting the setup mode may cause prob