valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
A barbecue is probably the only culinary event at which the proverb “Too many cooks spoil the broth” does not apply: When barbecuing, many cooks are at work. If you are not too easily seduced by rich sauces, grilled food is not only extremely tasty but also healthy and light, especially if you use lean meat, fish and vegetables. Bon appetit! All we would like to do now is to ask you to read these instructions carefully as they contain important safety and hazard warnings as well as useful barbecuing tips, and – of course – to wish you a wonderful summer. With best wishes from the BODUM® Design Team ASSEMBLY INSTRUCTIONS: BArBeCUe ASSeMBly 1. M5 screws (8x) 2. M6 screws (6x) 3. M5 nuts (8x) 4. M6 nuts (6x) 5. M6 cap nuts (3x) 6. Washers O 5 mm (16x) 7. Washers O 6 mm (9x) 8. lock washers O 6 mm (6x) 9. Positioning hooks (2x) 10. handle 11. Motor retaining plate with grill utensil hooks 12. Barbecue motor (battery powered 1 x lr20/1.5 v / D, not supplied) 13. Support legs with bracket (3x) 14. Support legs with foot (3x) 15. Stabilizer 16. Grill grate-large 17. rotary spit 18. Guide washer 19. Grill grate-small 20. Charcoal grate 21. Slit for rotary spit 22. Grilling bowl 23. Ash collector 24. ventilation openings 25. holding hooks-large 26. holding hooks-small ASSeMBly InSTrUCTIOnS Figure A Warning! Do not tighten the bolts and nuts too firmly in the following assembly step. Place the grilling bowl (22) carefully on a level surface and attach each of the three support legs with brackets (13) to the grilling bowl(22). Use two M6 screws (2), two O 6 mm washers (7), two O 6 mm lock washers (8) and two M6 nuts (4) for each support leg. Then insert one support leg with foot (14) into each support leg with bracket (13) and fix the support legs using the stabilizer (15), washers (7) and cap nuts (5) as shown in figure A. now tighten all screws and nuts on the barbecue sufficiently to ensure that they are sitting firmly. Figure B Place the barbecue on its support legs on a secure and level surface and attach the ash collector (23) to the grilling bowl (22). The ventilation openings (24) on the ash collector (23) can be opened and closed by turning the ash collector. The ventilation openings (24) on the ash collector should wherever possible remain open to ensure that air can circulate sufficiently. now attach the handle (10) and the motor retaining plate with grill utensil hooks (11) to the grilling bowl (22) using M5 screws (1), O 5 washers (6) and M5 nuts (3). Figures C and D The BODUM® “FyrkAT” Cone Grill can be used in either of two ways: as a barbecue with grill grates (16 / 19) or as a barbecue with rotary spit (17). Please refer to figures C and D for the appropriate assembly instructions. Barbecue with grill grates (figure C) If you wish to use the BODUM® Cone Grill with the grill grates, you must first insert the charcoal grate (20) into the grilling bowl (22). Then place the small grill grate (19) with the grate bars pointing down into the grilling bowl (22). Please ensure that the grate bar at the rear is placed exactly into the small holding hook (26) (see fig. C. / detail X) in order to secure the small grill grate (19) in its position. next, place the large grill grate (16) with the grate bars pointing up onto the upper edge of the grilling bowl (22) and insert into the slots provided there. Please also ensure that the large grill grate (16) is inserted into the retaining hook (25) (see fig. C / detail y) Barbecue with rotary spit (17) If you wish to use the BODUM® Cone Grill with the rotary spit and barbecue motor, first insert the charcoal grate (20) into the grilling bowl (22). Place the two positioning hooks (9) onto the rotary spit (17) and screw these tight at the desired position. The positioning hooks (9) serve to ensure that food being grilled on the spit (17) rotates evenly. now insert a battery (lr20, 1.5 v / D, not supplied) into the barbecue motor (12) and insert the barbecue motor into the motor retaining plate (11) from the side. Feed the rotary spit (17) through the hole on the grilling bowl (22) and the motor retaining plate (11) and insert into the square hole of the barbecue motor (12); position the other end of the rotary spit in the slit (21) on the opposite side of the grilling bowl. Please ensure that the guide washer (18) on the rotary spit (17) is located within the grilling bowl (22). This prevents the rotary spit from falling out when barbecuing. note: When barbecuing using the rotary spit, the small grill grate (19) and the large grill grate (16) must not be inserted. Please always use suitable grill utensils (e.g. BODUM® FyrkAT grill utensils) and barbecuing mitts when you wish to insert or remove the charcoal grate (20), the small grill grate (19) or the large grill grate (16). Before you use the BODUM® Cone Grill for the first time, we recommend that you allow the charcoal to glow for 30 minutes. Maximum charcoal filling level: 6 cm above the charcoal grate. HAZARD WARNIN...