valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
An asphalt or blacktop surface may not be acceptable for this purpose. 40. Do not use directly on wooden decks. 41. Keep all electrical cords away from a hot grill. 42. Do not use grill for indoor cooking or heating. TOXIC fumes can accumulate and cause asphyxiation. 43. After a period of storage and/or nonuse, check for leaks, and burner obstructions. 44. Failure to open lid while igniting the grill’s burner, or not waiting 5 minutes to allow the gas to clear if the grill does not light, may result in an explosive flame-up. 45. If grill is not in use, the gas must be turned off at the supply tank. 46. Never operate grill without heat plate installed. 47. Always use a meat thermometer to ensure food is cooked to a safe temperature. 48. Never cover entire cooking area with aluminum foil. 49. Do not store a spare LP gas tank under or near this appliance. 50. Please use protective gloves when assembling this product. 51. Do not force parts together as this can result in personal injury or damage to the product. 52. Deaths, serious injury or damage to property may occur if the above is not followed exactly. Safety First DANGERS and Cautions page no. Parts List 1 Lid Handle 2 Lid 3 Warming Rack 4 Cooking Grid 5 Top Hinge (2) 6 Burner 7 Wind Cover 8 Bottom Hinge (2) 9 Heat Plate 10 Heat Reflector Plate 11 Heat Plate Support (2) 12 Side Handle (2) 13 Side Handle Heat Reistant Washer (2) 14 Side Handle Heat Plate (2) 15 Bottom Bowl 16 Lock 17 Regulator/Control Valve 18 Leg (2) Exploded View 1 3 2 4 5 6 7 9 10 11 8 11 12 13 14 14 12 13 15 16 17 18 Hardware A Screw M5x12 Nickel Plated Phillips Truss Head 6 pcs B Screw M5x35 Nickel Plated Phillips Truss Head 4 pcs C Wing Bolt M6x15 Nickel Plated 1 pc D Wing Nut M5 Steel 10 pcs E Wing Nut M6 Steel 2 pcs F Washer M5 Steel 10 pcs G Washer M6 Steel 3 pcs H Washer o6 Heat Resistant 8 pcs I Lock Washer o5 Zinc Plated 10 pcs J Lock Washer o6 Zinc Plated 3 pcs K Pin o5 x 30 Zinc Plated 2 pcs L Cotter Pin o1.4 x 30 Steel 2 pcs Tools Required for Assembly (Not Included) #2 Phillips Head Screwdriver Assembly Instructions DO NOT RETURN PRODUCT TO STORE. For assistance call 1.800.762.1142 toll free. Please have your owner’s manual and serial number available for reference. For Easiest Assembly: • To avoid losing any small components or hardware, assemble your product on a hard level surface that does not have cracks or openings. 2 Attach Bottom Hinges A x 4 Dx 4 Fx 4 Hx 4 Ix 4 1 Attach Lid Handle and Top Hinges A x 2 Dx 2Ex 2Fx 2 Gx 2Hx 6 Ix 4 Jx 4 5 Attach Heat Reflector Plate and Burner Cx 1 Gx 1 Jx 2 6 Attach Wind Cover and Regulator/Control Valve Note: Once attached, the regulator/control valve will freely rotate to accomodate for the LP gas tank. Operating Instructions Connecting Gas Tank 1. Make sure the regulator/control valve is in the “LOCK OFF” position. 2. Lubricate the threads of the regulator valve with petroleum jelly, insert the gas tank into the regulator valve and hand-tighten firmly. 3. Test for leaks Checking for Leaks Burner Connection Make sure the control valve is securely fastened to the burner. If your unit was assembled for you, visually check the connection between the burner and control valve. WARNING: Failure to inspect this connection or follow these instructions could cause a fire or an explosion which can cause death, serious bodily injury, or damage to property. If the burner pipe does not rest flush to the control valve, please contact 1.800.762.1142 for assistance. Regulator / 1# LP Gas Tank Connection Make 2-3 oz. of leak solution by mixing one part liquid dishwashing soap with three parts water. Make sure control knob is off. Spoon several drops of solution, or use squirt bottle, at the LP gas tank to regulator connection. Inspect the solution at the connection, looking for bubbles. If NO bubbles appear, the connections are secure. If bubbles appear, you have a leak. Loosen and retighten this connection, making sure the connection is secure. Retest with solution. If you continue to see bubbles after several attempts, disconnect propane source and contact 1.800.762.1142 for assistance. Lighting 1. Make sure all labels, packaging and protective films have been removed from the grill. 2. Open lid. Attempting to light the burner with the lid closed may cause an explosion! 3. Make sure there are no obstructions of airflow to the gas unit. Spiders and insects can nest within and clog the burner / venturi tube at the orifice. A clogged burner tube can lead to a fire beneath the appliance. 4. Control knob must be in the “LOCK OFF” position. 5. Use a long lit match to light the burner. Access the burner through the hole in bottom bowl as indicated. WARNING: Never lean over the grill when lighting. 6. Turn the control knob to “HIGH” 7. If ignition does not occur in 5 seconds, turn burner control knob OFF, wait 5 minutes and repeat lighting procedure. 8. After lighting, observe the burner flame. Make sure all burner ports are lit and flame height matches i...