valutazioni - 3, GPA: 3.3
(
)
)
|
Facilità d'uso
Do not try it on any other device! – Apple iPod (iPod video, iPod nano, iPod Photo and iPod mini) – Philips GoGear HDD players (Charge function optional) or iPod GoGear IMPORTANT! • DC1000 is an iPod reader which transmits the signal from iPod to external speaker. It can be powered by power supply unit SA1460-240200 or SUPPLY APPARATUS FOR GENERAL USE, alterna- tively a special system having suitable supplying parameters through 9 pin DIN cable is available. • For indoor use only. What’s in the box Docking cradle 8 x iPod dock adaptor 4 x GoGear dock adaptors DIN Cable RCA Cable Quick Start Guide What else you’ll need WACS7000 IMPORTANT! The docking cradle only supports the devices listed below. Do not try it on any other device! – Apple iPod (iPod video, iPod nano, iPod Photo and iPod mini) – Philips GoGear HDD players (Charge function optional) or iPod GoGear IMPORTANT! • DC1000 is an iPod reader which transmits the signal from iPod to external speaker. It can be powered by power supply unit SA1460-240200 or SUPPLY APPARATUS FOR GENERAL USE, alterna- tively a special system having suitable supplying parameters through 9 pin DIN cable is available. • For indoor use only. A1 A1 Install Change the docking cradle to match with your portable player The docking cradle can support both iPod and GoGear. Follow steps below to change it into desired mode – Default position is prepared for iPod – Go to A2 Install for iPod user. 1. Slide the front cover horizontally in the direction shown above to open the front cover 2. Rotate the front cover in 180 degree 3. Slide the front cover back onto the docking cradle 1 A2 A2 Install 21Install dock adaptor Insert a dock adapter that matches with your portable player (take iPod adapter as example). 2 Install portable player Plug your portable player into the cradle (take iPod as example). – Turn on the power of pipe speakers. 3 Un-install To connect with a different portable player, dismount the iPod first, then pop up the dock adapter and then replace it with a new dock adapter of the matching type. B Connect (Audio Out) (Audio Out) Connect AC power The DC1000 is powered through WACS7000 by connect it with WACS7000 Center or Station via the 9 pin DIN cable. Connect audio cable Plug one end of the audio cable to the black 3.5mm Audio Out jack, and the other end to the audio in jacks on the WACS7000 Center or Station (note that the red terminal should be connected to the red jack). Center Station Center Station Note: Adjust volume in case playing sound is low after connect your iPod or GoGear with WACS7000! C1 C1 Enjoy When connection is successfully made, power on the WACS7000 Center or Station, then press SOURCE button to switch it to AUX mode, playing will start immediately.You can press the controls on your iPod or GoGear to skip/search for desired track or to stop playing. Besides, you can also use the 2-way remote control that comes with WACS7000 to enjoy your iPod or GoGear with WACS7000. Press PORTABLE button Play Press 2;to start playing • While pl...
Questo manuale è adatto anche per i modelli :Altoparlanti - DC1000/00 (552.6 kb)