valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Note ••Batteries are not supplied with the accessories. ••bAt shows on the display when the battery level is low. 1 Open the battery compartment. 2 Insert 2 batteries (type: 1.5V LR6/AA) with correct polarity (+/-) as indicated. 3 Close the battery compartment. Set time 1 Rotate the Third Knob to "SET TIME" to activate clock setting mode. »»Hour and minute digits blinks. 2 Rotate the First Knob to adjust the hour. 3 Rotate the Second Knob to adjust the minute. 4 Press OK on the First Knob to confirm. »»The setting time is displayed. 5 Rotate the Third Knob to CLOCK after setting. »»The hour and minute digits stops blinking. Note ••When an iPod/iPhone is connected, the clock radio synchronizes time from the iPod/iPhone automatically. Turn on The clock radio turns on automatically once your plugged in. Switch to standby mode Press SOURCE for 3 seconds to switch to standby mode. »»The source indicator on the display panel turns off. EN 4 Play from iPod/ iPhone You can enjoy audio from iPod/iPhone through this clock radio. Compatible iPod/iPhone The clock radio supports these iPod and iPhone models: Made for. • iPod touch (5th generation) • iPod nano (7th generation) • iPhone 5 Listen to audio from iPod/ iPhone Note ••Make sure that the Third Knob switched to CLOCK before setting. 1 Place the iPod/iPhone in the dock. 2 Press SOURCE repeatedly to select iPod/ iPhone mode. »»The on the display panel lights up. 3 Play audio on the iPod/iPhone. 4 Rotate the Second Knob to select previous or next track. To remove the iPod/iPhone: Pull the iPod/iPhone out of the dock. Charge the iPod/iPhone When the clock radio is connected to power, the docked iPod/iPhone starts charging. Adjust volume You can adjust volume by pressing VOLUME +/- repeatedly. EN 5 Listen to FM radio Tune to FM radio stations Tip ••Position the antenna as far as possible from TV, VCR, or other radiation source. ••For better reception, fully extend and adjust the position of the antenna. Note ••Make sure that the Third Knob switched to CLOCK before setting. 1 Press SOURCE repeatedly to select FM tuner source. »»FM on the display panel lights up. 2 Rotate and hold the Second Knob for two seconds. »»The clock radio tunes to a station with strong reception automatically. 3 Repeat step 2 to tune in to more radio stations. To tune to a station manually: Rotate the Second Knob repeatedly until you find optimal reception. Store FM radio stations automatically Note ••You can store a maximum of 20 FM radio stations. 1 In FM mode, rotate the Third knob to SET RADIO. »»FM begins to blink. 2 Press and hold OK on the First Knob for three seconds. »»The clock radio stores all the available FM radio stations, and broadcasts the first available station automatically. Store FM radio stations manually 1 In FM mode, rotate the Third Knob to SET RADIO. »»FM begins to blink. 2 Rotate and hold the Second Knob for two seconds. »»The last selected channel is displayed on the display panel. 3 Rotate the First Knob again to select the target preset position. 4 Press OK on the First Knob to confirm. 5 Repeat steps 2-4 to store other stations. Note ••To remove a pre-stored station, store another station in its place. EN Select a preset radio station Note ••Make sure that the Third Knob switched to CLOCK before setting. 1 Press SOURCE repeatedly to select FM tuner source. »»FM on the display lights up. 2 Rotate the First Knob repeatedly to select a preset radio station. 6 Other features Set alarm timer In standby mode, you can set two alarms to ring at different time. Note ••Make sure that you have set the clock correctly. 1 Rotate the Third Knob to SET AL1 or SET AL2 to activate alarm setting mode. »»The / .. and time digits blink. 2 Rotate the First Knob to adjust the hour. 3 Rotate the Second Knob to adjust the minute. 4 Press OK on First Knob to confirm. 5 Rotate the Third Knob to CLOCK after setting. Select alarm source For alarm sound, you can select buzzer, your last listened radio station, or the last played audio on your iPod/iPhone. Tip ••If DOCK is selected as the alarm source, yet the audio cannot be played, buzzer will sound when alarm time comes. ••If FM is selected as the alarm source and the speaker is playing under FM mode, buzzer will sound when alarm time comes. EN BUZZ KCOD FM Activate/deactivate alarm timer Note ••Make sure that the Third Knob switched to CLOCK before setting. 1 Press AL1/AL2 to view alarm settings. »»The / .. lights up. 2 Press AL1/AL2 again to activate or deactivate the alarm timer. »» The / .. appears if alarm timer is on and disappears if it is off. • To stop the ringing alarm, press the corresponding AL1/AL2. »»The alarm repeats ringing for the next day. Snooze the alarm When alarm sounds, press SNOOZE. »»The alarm snoozes and repeats ringing nine minutes later. Set sleep timer Note ••Make sure that the Third Knob switched to CLOCK before setting. This clock radio can switch to standby mode automatically after a preset period. • Press SLE...