valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
Ensure that the batter y compar tment is completely secure after you replace the batter y. • If the batter y compar tment cannot be completely secured, discontinue use of the product. Keep out of reach of children and contact the manufacturer. EN 2 Your clock radio Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at What's in the box Manual 3 Get started Always follow the instructions in this chapter in sequence. Install battery Warning • Risk of explosion! Keep the batter y away from heat, sunshine or fire. Never discard the batter y in fire. • Danger of explosion if batter y is incorrectly replaced. Replace only with the same or equivalent type. • The batter y contains chemical substances, so it should be disposed of properly. Note • You can only use AC power as power supply.The lithium CR2032 batter y can only back up time and alarm settings. • When power is disconnected, the display backlight turns off. For first-time use : Remove the protective tab to activate the batter y. EN 4 5 EN To replace the battery : Connect power Caution •• Risk of product damage! Make sure that the power voltage corresponds to the voltage printed on the back or underside of the clock radio. •• Risk of electric shock! When you unplug the AC adapter, always pull the plug from the socket. Never pull the cord. Set clock 1 In standby mode, press and hold SET TIME for two seconds. 2 Press - HR/HR + (or - MIN/MIN +) to select 12/24 hour format. 3 Press SET TIME to confirm. »»The hour and minute digits blink. 4 Press - HR/HR + and - MIN/MIN + to set the hour and minute respectively. 5 Press SET TIME again to confirm. Note •• When iPod/iPhone is connected, the clock radio synchronizes time with the iPod/iPhone automatically. 4 Play from iPod/ iPhone You can enjoy audio from iPod/iPhone through this clock radio. Compatible iPod/iPhone The clock radio suppor ts these iPod and iPhone models: Made for. • iPod touch (5th generation) • iPod nano (7th generation) • iPhone 5 Listen to audio from iPod/ iPhone 1 Place the iPod/iPhone in the dock. (Fig. 5) 3 Play audio on the iPod/iPhone. • To skip to a track, press - HR/HR + (or -MIN/MIN +). • To search during play, press and hold -HR/HR + (or - MIN/MIN +), then release to resume normal play. Tip • Press iPhone again to switch to standby mode. To remove the iPod/iPhone: Pull the iPod/iPhone out of the dock. Charge the iPod/iPhone When the clock radio is connected to power, the docked iPod/iPhone star ts charging. Adjust volume -VOL/VOL+ 2 Press iPhone to enter iPod/iPhone mode. EN 6 5 Listen to FM radio Tune to FM radio stations Tip • Position the antenna as far as possible from TV,VCR, or other radiation source. • For better reception, fully extend and adjust the position of the antenna. bTUNING +/- aRADIO HR HR TUNING Note • To turn the radio on or off, press RADIO. Store FM radio stations automatically You can store a maximum of 20 FM radio stations. 1 Press RADIO to turn on the radio. 2 Press and hold SCAN/PROG for two seconds. » The clock radio stores all the available FM radio stations, and then broadcasts the first available station automatically. Store FM radio stations manually 1 Tune to an FM radio station. 2 Press SCAN/PROG. » The preset number begins to blink. 3 Press PRESET +/- repeatedly to select a number. 4 Press SCAN/PROG again to confirm. 5 Repeat steps 1-4 to store other stations. Note • To remove a pre-stored station, store another station in its place. Select a preset radio station In tuner mode, press PRESET +/-to select a preset radio station. 7 EN 6 Other features Set alarm timer You can set two alarms to ring at different time. Note • Make sure that you have set the clock correctly. 1 Press and hold AL1/AL2 for 2 seconds to enter alarm setting mode. » The hour and minute digits blink. » or is displayed accordingly. 2 Press - HR/HR + and - MIN/MIN + to set hour and minute respectively. 3 Press AL1/AL2 again to confirm. Select alarm sound For the alarm sound, you can select buzzer, your last heard radio or played track on the iPod/ iPhone. (Fig. 8) Tip • When alarm time arrives and you are listening to radio or audio from the iPod/iPhone, buzzer can only be activated as alarm sound. • If you have selected iPod/iPhone as the alarm source, yet no iPod/iPhone is connected, buzzer will sound when alarm time comes. Activate/deactivate alarm timer 1 Press AL1/AL2 to view alarm settings. 2 Press AL1/AL2 again to activate or deactivate the alarm timer. » or appears if alarm timer is on and disappears if it is off. • To stop alarm, press the corresponding AL1/AL2. » The alarm repeats ringing for the next day. Snooze the alarm When alarm sounds, press SNOOZE. » The alarm snoozes and repeats ringing nine minutes later. Set sleep timer This clock radio can switch to standby mode automatically after a preset period. • Press SLEEP repeatedly to sel...