valutazioni - 4, GPA: 4.8
(
)
)
|
Facilità d'uso
For… Use this adapter… iPod Mini (4 GB/6 GB) 3 iPod (20 GB/U2 Special Edition) 4 iPod (40 GB) 5 iPod with color display (20 GB/30 GB/U2 Special Edition) 6 iPod with color display (40 GB/60 GB) 7 iPod Nano 8 iPod Video (30 GB) 9 iPod Video (60 GB) 10 2 Place your iPod in the docking station. 3 Remove the plastic tab on the remote control before using the fi rst time. DX-IPDR.1 Connecting to a TV using the S-Video or A/V cable 1 To connect S- Video, plug the S- Video cable into the docking station and your TV. 2 To connect standard video, connect the A/V cable into the docking station’s 3.5mm auxiliary jack, then connect the yellow RCA plug to your TV’s yellow Video In jack. Connecting to an external audio device 1 To connect external audio, connect the A/V cable into the docking station’s 3.5mm auxiliary jack, then connect the red and white RCA plugs to your audio device’s red and white Audio In jacks. Connecting power using the USB sync cable 1 Plug the AC power adapter into an AC power outlet. 2 Plug the USB sync cable into the USB port on the AC power adapter and the 30-pin connector on the back of your docking station. 3 You may control your iPod charging mode using the ON/OFF switch located on the side of your docking station. A/V cable S- Video cable A/V cable S- Video cable 4/22/2006 11:43:02 4 The LED turns green to indicate that the docking station is charging your iPod. If you turn the ON/OFF switch off, the LED turns off . 5 Your iPod works normally whether the ON/OFF switch is on or off . Using your docking station Synchronizing with your computer 1 Plug the sync cable’s 30-pin connector into the back of the docking station. 2 Plug the sync cable’s USB plug into a USB port on your computer. Using the remote control Play/pause Volume up Forward Reverse Volume down 1 Point the remote control toward the sensor on the docking station. 2 Stay within a range of 16’ (4.88 meters) and 60°. Note: The battery lasts about one year. Replace the battery if the remote control does not work or when the battery fails (see Replacing the battery). Tip: Remove the batteries if you will not be using the remote control for a period of time. Using the remote control to listen to music Play/Pause: Press and release to play or pause. Press and hold to turn on or off . Forward: Press and release to skip to the next track. Press and hold to fast-forward search. Reverse: Press and release to skip to the previous track. Press and hold to fast-rewind search. Volume Up: Press to increase volume. Volume Down: Press to decrease volume. Using the remote control to view photos Play/Pause: Press and hold to turn on or off . Press and release to play or pause the slideshow and background music. Forward: Press and release to skip to the next photo in the slideshow or next track of the background music. Press and hold to change skip control from slideshow to background music. Reverse: Press and release to skip to the previous photo in the slideshow or previous track of the background music. Press and hold to change skip control from slideshow to background music. ( You cannot change skip control from background music back to slideshow control. ) Volume Up: Press to increase volume. Volume Down: Press to decrease volume. Using the remote control to watch videos Play/Pause: Press and release to play or pause. Press and hold to turn on or off . Forward: Press and release to skip to the next video. Press and hold to fast-forward search. Reverse: Press and release to skip to the previous video. Press and hold to fast-rewind search. Volume Up: Press to increase volume. Volume Down: Press to decrease volume. Replacing the battery 1 Insert a pen or other pointed object into the battery release hole, then slide the pen in the direction of the arrow (away from the edge of the remote control). 2 While holding the pen in the direction of the arrow, slide the battery holder out of the remote control. 3 Insert the battery according to the polarity indicated inside the battery holder (with the + side up). 4 Slide the battery holder back into the remote control. Note: Replace with type 3V CR2025 battery. Warnings • Disassembling yourdocking station, remote control, or AC power adapter may damage them. • Do not use the docking station and AC power adapter in a wet environment. • If your iPod does not recharge after 8 hours, contact Dynex for service. • Keep the docking station away from children. This Class B digital apparatus complies with Canadian ICES-003. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Disclaimer Dynex is the trademark of Best Buy, Inc. iPod is a registered trademark of Apple Computer, Inc., registered in the U.S. and other countries. All rights reserved. TV and stereo not included. DX-IPDR.2 4/22/2006 11:...