valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
Never use any product containing alcohol or other solvents as they may damage the surface. • Use caution when plugging the power transformers in an AC outlet to avoid the risk of electric shock. • If the speaker are used outside on a deck or patio, make sure you take them indoors in the event of a rainstorm to prevent possible damage. • Do not operate or store the system in extreme temperatures (below 32.F/0.C and above 122.F/50.C). • To avoid electrical shock, use this product with caution near water sources if powered with the AC adapter. Never submerge in water. Tour of the Speaker System Transmitter AC/DC 12V 200mA adapter Speaker AC/DC 9V 1200mA adapter 3.5mm to RCA cable Speaker Front Panel Power indicator blinks when the speaker is first powered on; it turns solid blue when the speaker is tuned to the transmitter Side Panel Bass Boost button turns the speaker’s bass enhancement on and off On/Off button turns the speaker on and off Auto Scan button rescans for the transmitter’s signal Volume +/– buttons adjust the volume level Bottom Panel L/M/R switch determines if the speaker plays sound in mono as a stand-alone speaker, or plays the left or right track in a stereo pair with an additional AW826 DC IN receives the small round end of the included 9V 1200mA AC power adapter; remove the protective cover to insert the adapter Battery Compartment Cover remove to install 6 AA batteries Carrying handle Transmitter Top Panel Signal indicator lights green when the audio is present and the transmitter is broadcasting Power indicator lights when the transmitter is on Back Panel CHANNEL 1 2 3 lets you find the best transmission frequency for your environment DC IN jack receives the small round end of the included 12V 200mA AC power adapter AUDIO IN (R / L) connects to your sound source using one of the connection options shown here Included Accessories Note: These power units should be plugged in so that they stay vertical or lie flat. Connecting the Speaker System Powering the Transmitter Connect the small, round plug from the transmitter AC power adapter to the transmitter’s DC IN jack. Plug the other end of the transmitter AC power adapter into any standard 120V AC wall outlet. Note: Be sure to use the AC power adapter rated 12V DC 200 mA (it has the smaller diameter plug). Transmitter (back panel) 120V AC wall outlet AC Power Adapter CHANNEL DC IN 1 2 3 R AUDIO L IN Note: There is no transmitter ON/OFF switch. The transmitter is designed to be left plugged in and powered at all times. If you will not be using the AW826 for an extended period of time, unplug the transmitter AC power adapter. Connecting to an Audio Source Connecting to an MP3 player, CD player, or computer 1. Plug the stereo plugs on the provided Y-adapter audio cable into the AUDIO IN jacks on the back of the transmitter (make sure to match the colors on the plugs and jacks). 2. Plug the mini-plug end of the provided Y-adapter into the headphone output of your MP3 player or CD player (or audio output jack on your computer). AC Power Adapters 1. Insert the small, round plug from the speaker AC power adapter into the DC IN jack on the bottom of the speaker. 2. Plug the other end of the speaker AC power adapter into any standard 120V AC wall outlet. L M R DC IN AC power adapter 120V AC wall outlet Bottom of the speaker Note: Be sure to use the speaker AC power adapter rated 9V DC 1200 mA. Warning: This product is water-resistant, not waterproof. Avoid prolonged exposure to wet environments, such as rain, mist, dew, etc. In other words, you can take it out, just don’t leave it out. If you plan to use the speaker in a humid or wet environment, we recommend powering it with batteries instead of with the power adapter. AA Batteries 1. Remove the battery compartment cover on the bottom of the speaker. 2. Insert six (6) AA batteries (not included) into the speaker following the polarity (”+” and “-”) as diagrammed inside the battery compartment. 3. Replace the battery compartment cover on the bottom of the speaker. Note: Place the rubber cap in the speaker power input jack when using batteries. DO NOT mix batteries with different chemistry types (for example, a zinc battery with an alkaline battery). DO NOT mix new and used batteries. DO NOT leave batteries installed in the product when not in use for long periods. Always remove old, weak or worn-out batteries promptly and recycle or dispose of them in accordance with local and national regulations. Powering the Speaker There are two options to power your wireless speaker: using the included AC power adapter or using 6 AA batteries (not included). Warning: This product is designed to work with line level outputs or headphone outputs only. DO NOT connect it directly to speaker outputs as it will permanently damage the transmitter. Connecting to an A/V Receiver 1. Plug the stereo plugs on the provided Y-adapter audio cable into the AUDIO IN jacks on the back of the transmitter (make sure to match the co...