valutazioni - 1, GPA: 3
(
)
)
|
Facilità d'uso
PACKING LIST The acoustical system Includes the following components: 1. Subwoofer 2. Five satellite speakers with wires 3. Three audio cables 4. Remote control unit 5. Battery for remote control unit. 6. AM antenna 7. FM antenna 8. Operating instructions DEVICE DESCRIPTION 1. Subwoofer 2. Satellite speaker 3. Center speaker 4. Signal line 5. Remote REMOTE CONTROL UNIT 1. Power on/off button (STANDBY) 2. MUTE button 3. Audio source selection button (INPUT) 4. 3D sound mode button 5. STEREO/MONO signal reception selection button (ST/MN) 6. Volume control buttons for all channels (VOL+/-) 7. Volume control buttons for front-left channel (FL+/-) 8. Volume control buttons for front-right channel (FR+/-) 9. Volume control buttons for center channel (CEN+/-) 10. Volume control buttons for subwoofer (SUB+/-) 11. Volume control buttons for rear-left channel (SL+/-) 12. Volume control buttons for rear-right channel (SR+/-) 13. Number entry buttons (0-9) 14. Button for entering number of 10 and higher (10+) 15. Button for programming radio stations into memory (MEMORY) 16.Radio band selection button (AM/FM) 17.Manual tuning buttons (TUNE +/-) 18.Button for automatic tuning of radio stations (SCAN) REAR PANEL OF SUBWOOFER 1.2.1 audio input jacks 2.5.1 audio input jacks 3.Output jacks for front right and left satellite speakers (FR, FL) 4.Output jacks for rear right and left satellite speakers (RR, RL) 5.Output jack for center speaker (CEN) 6.FM antenna jack 7.AM antenna jack 8.Power switch 9.Fuse 10.Power cord 4 4 02 6.qxd 04.10.2005 11:31 Page 5 ENGLISH CONNECTION Make sure that the device connected to the subwoofer (DVD player, for example) is turned off. Set the overall system volume to a minimum before making connections. 1.Open the lid of the battery compartment on the remote control unit and insert the batteries, according to proper polarity, 2.Connect the wires from the front left and right satellite speakers, the central speaker, and the rear left and right satellite speakers to the output jacks on the rear panel of the subwoofer marked FR, FL, CEN, RR, and RL. 3.Using an audio cable, connect any 2-channel audio source (CD player, for example) to the 2.1 CH INPUT jacks and any 6-channel audio source (for example, a DVD player with built-in AC-3/Dolby Digital decoder) to the 5.1 CH INPUT jacks on the subwoofer, 4.Connect the AM and FM antennas to their respective jacks located on the rear panel of the subwoofer. 5.Connect the power cord to an electrical outlet and set the power switch, located on the rear panel of the subwoofer, to the ON position. Start playback on the connected audio source and use the volume control, located on the remote control unit or on the front panel of the subwoofer, to set the desired volume level. 5 -Q- 4 02 6.qxd 04.10.2005 11:31 Page 6 ENGLISH SYSTEM OPERATION A. TURNING THE POWER ON / OFF 1. Make all the necessary connections in accordance with the setup instructions before turning on the device. 2. Connect the system’s power cord to an electrical outlet. (ATTENTION: The power source should conform to the device’s power supply requirements). 3. Set the power switch, located on the rear panel of the device, to the ON position. Press the STANDBY button, located on the remote control unit or on the front panel of the device, to turn on the device’s power. B. VOLUME 1. Press the VOL + button on the remote control unit to increase the overall system volume; the display on the front panel will show the overall volume level of the system in a numerical format. 2. Press the VOL - button on the remote control unit to decrease the overall system volume; the display on the front panel will show the overall volume level of the system in a numerical format. C. 3D SOUND MODE 1. Connect the center and rear speakers to the system. 2. Press the 3D button located on the remote control unit to turn the 3D sound on or off. D. CENTER SPEAKER 1. Press the CEN + button on the remote control unit to increase the volume level on the central speaker; the display on the front panel will show the volume level of the central speaker in a numerical format. 2. Press the CEN - button on the remote control unit to decrease the volume level on the central speaker; the display on the front panel will show the volume level of the central speakers in a numerical format. E. REAR SPEAKERS 1. Press the REAR + button on the remote control unit to increase the volume level on the rear speakers; the display on the front panel will show the volume level of the rear speakers in a numerical format. 2. Press the REAR - button on the remote control unit to decrease the volume level on the rear speakers; the display on the front panel will show the volume level of the rear speakers in a numerical format. F. FRONT SPEAKERS 1. Press the FRONT + button on the remote control unit to increase the volume level on the front speakers; the display on the front p...
Questo manuale è adatto anche per i modelli :Altoparlanti - VT-4036 BN (330.3 kb)
Altoparlanti - VT-4026-4036 (330.27 kb)