valutazioni - 2, GPA: 4
(
)
)
|
Facilità d'uso
The tuner will tune to a radio station automatically. 5. Press the TUNE+ or TUNE- button on the remote control unit to tune to a radio station manually. 6. Press the ST/MN button on the remote control unit while in the FM band to choose between stereo and mono modes. 7. To save a chosen radio station into memory, press the MEMORY button on the remote control unit and then press the desired memory location number on the numeric keypad and the station will be saved into memory. To enter a number of ten or higher, first press the 10+ button and then a numeric button from 0-9. NOTE: You can save up to 20 radio stations into memory. RESOLVING MALFUNCTIONS 1. THERE IS NO SOUND AT ALL (1) Make sure the system is connected properly. (2) Increase the volume. (3) Make sure the audio input is selected properly. (4) Make sure the MUTE function has not been activated. 2. NO SOUND IS COMING FROM THE FRONT-LEFT SPEAKER (1) Make sure the front-left speaker is properly connected to the device. (2) Make sure the device is properly connected to the audio source. 3. NO SOUND IS COMING FROM THE FRONT-RIGHT SPEAKER (1) Make sure the front-right speaker is properly connected to the device. 5 -Q- 4027.qxd 04.10.2005 11:16 Page 6 ENGLISH (2) Make sure the device is properly connected to the audio source. 4. NO SOUND IS COMING FROM THE CENTRAL SPEAKER (1) Make sure the central speaker is properly connected to the device. (2) Make sure the device is properly connected to the audio source. (3) Increase the volume of the central speaker. 5. NO SOUND IS COMING FROM THE REAR SPEAKERS (1) Maker sure the rear speakers are connected properly. (2) Make sure the device is properly connected to the audio source. NOTE: The central and rear speakers only work if the system is connected to a six-channel audio source (for example, a DVD player with an AC-3/Dolby Digital decoder) or, if in 3D mode, when connected through the 2.1 CH audio input. APPENDIX When connecting the device to a DVD player with a built-in DD/DTS decoder, verify the following: 1. When connected through the 5.1 CH. audio input, the 5.1 CH audio output should be chosen in the player's settings. Playback discs with AC-3/Dolby Digital 5.1 CH audio tracks. 2. To turn on the subwoofer, make sure that the speaker size in the player's settings for the front, central and rear speakers is "Small” and that the subwoofer output is set to "On." When connecting the device to DVD player, carefully read the operating instructions for the DVD player. PRECAUTIONARY MEASURES: Attention: Please carefully read the points listed below to ensure safe use of the device. 1. Read the instructions - The safety instructions and operating rules should be read before using the device. 2. Save the instructions - Save the instructions for future use. 3. Follow the operating rules - All of the safety instructions should be followed. Warning symbols - Heed the indications of all warning symbols located on the device's panels or in these instructions. Power source - The device should only be connected to a power source with the characteristics indicated on the rear panel of the device or in these instructions. Protecting the power cord - The power cord should be laid out in such a way that it will not be damaged by external items or its surroundings. Water and moisture - Do not use the device near reservoirs of water (for example, bath tubs, sinks, etc). 8. Ventilation - Install the device in a well ventilated room. Do not install the device on couches, beds or carpets because the device's ventilation may be blocked. 9. The effects of heat - Do not install the device near heat sources (for example, radiators, kitchen stoves, etc). 10. Periods of non-use - if the device will not be used for a long period of time, disconnect the power plug from the electrical outlet. 11. The need for maintenance - Utilize the services of qualified technicians if: • The power cord is damaged; or • The device body is damaged; or 4. 5. 7. • The device was subjected to rain; or • The device is not functioning properly; or • The device was subjected to shock. 12. Repair service - The consumer should not attempt to repair the device himself. Use only the services of a qualified technician. 13. Clean the device with a dry, soft clothe only. 14. Turn off the device during thunderstorms or when not in use for a long period of time. TECHNICAL CHARACTERISTICS Power supply: Output power: Subwoofer speaker: Satellite speakers: Channel separation: Signal/noise ratio: ~220-230 Volts 60 W (Subwoofer) + 5 x 35 W (Satellite speakers) 8”/4 Om 2”/8 Om >45 dB >85 dB Reproducible frequency band: 35 Hz - 200 Hz (Subwoofer) 150 Hz - 20 KHz (Satellite speakers) AM/FM Tuner General FM tuner characteristics: Frequency band: 87.00 MHz ~108.00 MHz Frequency tuning step: 50/100 KHz Intermediate frequency of oscillation: 10.7 MHz Temperature range: -5 - +70°C Antenna input impedance: 75 O...
Questo manuale è adatto anche per i modelli :Altoparlanti - VT-4037 BN (326.07 kb)
Altoparlanti - VT-4027-4037 (326.03 kb)