valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Connecting 21
Advanced Setting
Notes on network connection
If you want to set the network settings manually,
y Many network connection problems during set
use W/S to select [Advanced Setting] on the
up can often be fixed by re-setting the router or
[Network Setting] menu and press ENTER (b).
modem. After connecting the unit to the home
1. Use W/S to select [Wireless] and press ENTER
network, quickly power off and/or disconnect
(b).
the power cable of the home network router or
cable modem. Then power on and/or connect
the power cable again.
y Depending on the internet service provider (ISP),
the number of devices that can receive internet
2
service may be limited by the applicable terms
C
onnecting
of service. For details, contact your ISP.
y Our company is not responsible for any
[AP List] - Scans all available access points or
malfunction of the unit and/or the internet
wireless routers within range and display them
connection feature due to communication
as a list.
errors/malfunctions associated with your
broadband internet connection, or other
[Network name (SSID)] – Your access point
connected equipment.
may not be broadcasting its network name
(SSID). Check your access point settings through
y Some internet content may require a higher
your computer and either set your access
bandwidth connection.
point to broadcast SSID, or manually enter the
y Even if the unit is properly connected and
network name in [Network name(SSID)].
configured, some internet content may not
[PBC] – If your access point or wireless
operate properly because of internet congestion,
router that supports the PBC (Push Button
the quality or bandwidth of your internet service,
Configuration) method, select this option and
or problems at the provider of the content.
press the Push Button on your access point
y Some internet connection operations may not
within 120 counts. You do not need to know the
be possible due to certain restrictions set by the
network name (SSID) and security code of your
Internet service provider (ISP) supplying your
access point.
broadband Internet connection.
[PIN] – If your access point supports the PIN
y Any fees charged by an ISP including, without
Code configuration method based on WPS(Wi-
limitation, connection charges are your
Fi Protected Setup), select this option and
responsibility.
note the code number on the screen. And
y A 10 Base-T or 100 Base-TX LAN port is required
then, enter the PIN number on a setting menu
for wired connection to this unit. If your internet
of your access point to connect. Refer to the
service does not allow for such a connection,
documentation for your network device.
you will not be able to connect the unit.
2. Follow the instructions of each connection
y You must use a Router to use xDSL service.
method on the screen.
y A DSL modem is required to use DSL service and
, Note
a cable modem is required to use cable modem
To use PBC and PIN network connection,
service. Depending on the access method of and
security mode of your access point must be
subscriber agreement with your ISP, you may not
set to OPEN or AES.
be able to use the internet connection feature
contained in this unit or you may be limited to
the number of devices you can connect at the
same time. (If your ISP limits subscription to one
device, this unit may not be allowed to connect
when a PC is already connected.)
...