valutazioni - 3, GPA: 4.3
(
)
)
|
Facilità d'uso
128-4729A RADIO PREPARATION: 1. Select two of the five mounting tabs provided and match the radio mounting style of the vehicle according to Figures 1 through 3 below. NOTE: Tab number is stamped on bottom of tab. 2. Attach the mounting tabs to the radio chassis with the two M4 X 5 screws provided. 3. Attach the 14-pin connector harness provided to the radio. FIG. 1 TAB #1 - I M4 SCREW -i TAB #2 - M4SCREW FIG. 2 TAB #3 M4SCREW -0» — TAB #2 - - M4 SCREW RADIO INSTALLATION: 1. Remove dash panel from vehicle to expose sub-dash. 2. Remove and discard radio dummy panel attached to sub-dash. NOTE: Do not discard hardware for dummy panel. 3. Pre-wire radio including antenna wire. Attach ring lug on ground wire (black w/white stripe) from radio harness side and the vehicle side grounding strap to the rear of the radio chassis using the M5 x 8 screw provided. See Fig. 4 below. 4. Install radio into sub-dash of vehicle using the M6 x 18 self-tapping screws provided. 5. Conduct a brief performance test to verify proper operation. 6. Replace dash panel. FIG. 4 SCREWS...