valutazioni - 4, GPA: 3.8
(
)
)
|
Facilità d'uso
Congratulations 4 FCC Information FCC Information FCC InformationFCC InformationFCC InformationFCC InformationFCC Information NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful in terference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. How ever, there is no guarantee that interference will not occur in a particular instal lation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: — Reorient or relocate the receiving antenna. — Increase the separation between the equipment and receiver. — Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. — Consult the dealer or an experienced radio/TV technician for help. This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. The user is cautioned that changes or modifications not expressly approved by XM® Satellite Radio, Inc. can void the user’s authority to operate this device. Please note that the cables and antenna wire that has been supplied with your car installation kit are supplied with permanently attached ferrite beads. It is the responsibility of the user to use the cable and antenna wire with the ferrite beads. By adhering to these warnings and safety considerations, stated in the manual and by XM®, accidents. 5 Cautions and Warnings Cautions and WarningsCautions and WarningsCautions and WarningsCautions and WarningsCautions and Warnings 1. Do not install the CommanderMT Display Controller in a position that hinders your view through the windshield, or obstructs viewing of the dashboard indicators and displays. 2. Do not install the Display Controller where it may obstruct the operation or deployment of safety devices, such as airbags, etc. 3. Do not allow operation of the unit to detract from safe driving practices; remember that you are responsible as the vehicle operator to adhere to all safe driving and traffic regulations. 4. By adhering to these warnings and safety considerations, serious accidents and/or personal injury can be avoided. Cautions and Warnings 6 CommanderMT Receiver Components Commander CommanderCommanderCommanderCommanderCommanderMT Receiver Kit Components MT Receiver Kit ComponentsMT Receiver Kit ComponentsMT Receiver Kit ComponentsMT Receiver Kit ComponentsMT Receiver Kit Components 12 Vdc CommanderMT Display Controller Remote Control XM Mini-Tuner FM Direct Adapter XM Car DIN OpeningTrim Bezel Snap-OnMountingPlate Interconnect Cradle 0p/dmenu987654321^^ Antenna Power Cable 7 Installation/Wiring Precautions Installation/Wiring PrecautionsInstallation/Wiring PrecautionsInstallation/Wiring PrecautionsInstallation/Wiring PrecautionsInstallation/Wiring Precautions 1. To prevent a short-circuit, be sure to turn off the ignition and remove the negative (-) battery cable prior to installation. Connect power wires last. 2. Do not install the CommanderMT Display Controller in locations exposed to direct sunlight, or in areas subject to extreme temperatures, or damage could occur. 3. Incorrect installation may cause damage to the system. Mount the system components using the suggested methods recommended in this manual. 4. Be careful not to crimp or twist the vehicle wiring. 5. Use only the 12 Volt DC Power Cable supplied. Use of an alternative power source could damage the CommanderMT System components or vehicle wiring. 6. Locate the CommanderMT Display Controller in an area of the vehicle where it will not obstruct the driver’s operation of the vehicle and where it will not pose a risk to driver or passengers in the event of an emergency stop. Installation/Wiring Precautjions 8 Cabling Interconnections Setting Up and Installing Y Setting Up and Installing YSetting Up and Installing YSetting Up and Installing YSetting Up and Installing YSetting Up and Installing Your Kit our Kitour Kitour Kitour Kitour Kit NOTE: The XM® signal can be received and processed virtually anywhere as long as there are no obvious satellite signal obstructions such as nearby buildings, high terrain, parking garages or tunnels. 1. Cabling Interconnections You can begin to enjoy XM® Satellite Radio as soon as the CommanderMT System Vehicle Kit installation is complete. Set up yourAudiovox CommanderMT System using the following installation instructions, or enlist the help ...