valutazioni - 2, GPA: 4 ( )

Produttore : Blaupunkt File Size : 240.91 kb File Nome : Lingua di insegnamento:

“SCAN” and the station name or frequency will flash alternately in the display. To select a off the Radio Scan • Press SCA or the rocker switch briefly. If you do not select a will automatically switch band has been run The unit will tune into were listening to before you started function. Changing the scan time The scan time can be set from between five to a maximum of 30 seconds. Please refer to the section on “DSC programming - SCANTIME”. Selecting the seek tuning sensitivity You can alter the automatic seek tuning sensitivity. If “lo” is displayed, the radio will only pick up strong, local stations (low sensitivity). If “lo” does not light up, the radio will also pick up weaker, more distant stations (high sensitivity). If you want to alter the sensitivity level, please refer to the section on “DSC programming - LO/DX”). ENGLISH 57 Radio (Radio Data System) Radio (Radio Data System) Switching (FM) If reception is poor, sound quality by switching mono in the DSC menu. is switched on, stereo playback automatically. The unit will automatically switch to the signal received is not strong enough stereo playback. If you would like to switch to mono, refer to “DSC programming - STEREO/MONO”. The mode selected is indicated briefly in the display. Automatic bandwidth adjustment (SHARX) In the DSC menu, you can use the SHARX function to adjust the bandwidth in the FM frequency range. This can be a great advantage when there are a large number of stations within your current reception range. Interference with strong adjacent stations can be reduced to an absolute minimum if you activate SHARX ON (factory setting). If necessary, refer to the section on “DSC programming – SHARX”. PTY - Program Type PTY is an RDS service number of broadcasting to offer. This feature FM stations according type. After you have chosen preference, the corresponding be selected either by seek tuning the scan function. Switching PTY on/off • Press PTY. When the function is active, the program type selected last will briefly appear in the display, e.g. “SPORT”. As long as PTY is active, “PTY” will appear permanently in the display. Program type Use << >> to have the last selected program type displayed and to choose a new one. You can select with the preset Requirement: PTY You can use DSC to select Eng lish or French as the language display (refer to the section pro gramming – PTY LANG”). The following list indicates all of the types which are currently available. The letters printed in bold are identical to the abbreviation which appears briefly in the display. NEWS CURRENT AFFAIRS INFORMATION SPORT EDUCATE DRAMA CULTURE SCIENCE VARIED POP MUSIC ROCK MUSIC EASY MUSIC LIGHT MUSIC CLASSICS OTHER MUSIC WEATHER FINANCE CHILDREN’S PROGRAMS Radio (Radio Data System) Radio (Radio Data System) SOCIAL AFFAIRS RELIGION PHONE IN TRAVEL LEISURE JAZZ MUSIC COUNTRY MUSIC NATIONAL MUSIC OLDIES MUSIC FOLK MUSIC DOCUMENT Checking the program type of the station On menu level 2 • Press PTY for approx. 2 seconds. After the beep tone the display will show the program type offered by the station currently playing. If “NONE” appears in the display, the current station has no PTY code. Displaying the selected program type • Press << or >> . The program type selected last will be displayed briefly. Selecting a a) Using the preset When PTY is switched the preset buttons ST1 the program types stored • Press one of the presets ST1 The selected program type will be for 2 seconds. If you would like to listen to a station with this PTY, • press / to start the seek tuning function. If the radio is unable to find a station offering the selected program type, the display will show “NO PTY” and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated. You can assign different program types to each preset position. Please refer to the next section on “Storing program types”. b) Using the << >> buttons on the rocker switch When PTY is switched on, you can select a program type using buttons << >> . • Press << or >> ; the program type selected last will be displayed for 3 seconds. • During this period >> (forwards) or << (backwards) to the desired type. • Press << or >> as many times as required. If you would like to listen to with the selected PTY, • press / to start the seek tuning function. If the radio is unable to find a station offering the selected program type, the display will show “NO PTY” and a beep tone will be emitted. The radio will select the station which was tuned into before seek tuning was activated. Storing program types Each of the preset buttons ST1 - ST6 has been assigned one program type at the factory. If desired, you can also replace these with other available program types. To do so, make sure that “PTY” lights up in the display. • If necessary, press the PTY button to switch on the function. • Select a program type using buttons << >> and • hold down the desired preset button (ST1-ST6) un...

Scarica la tua

Per scaricare, digitare 2 cifre :