|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
n Manual Tuning [> TUNE]: Higher frequency [< TUNE]: Lower frequency Seek Tuning Press and hold... [> TUNE]: Higher frequency [< TUNE]: Lower frequency Tuning will automatically stop when the signals of the next broadcast station are received. Mono/Local Selection- MONO: Noise is significantly decreased when weak signals are received from an FM broadcast station. LOCAL: Only strong signals of stations are searched in seek tuning, while at the LOCAL OFF setting, relatively weak signals are also searched. FM broadcast: Press [M/L] (MONO/LOC) to change the mode. AM broadcast: Press [M/L] (MONO/LOC) to switch LOCAL mode on and off. FM broadcast: nnoi Ï MW'm 6 №.. ms rfrTTv [ AM broadcast: w~m tm MONO off/ LOCAL off (Default) MONO on/ LOCAL off MONO on/ LOCAL on MONO off/ LOCAL on LOCAL off (Default) LOCAL on Preset Station Setting Display Change Up to 6 stations each can be saved in the FM1, Press [DISP] (display) to switch to the clock dis-FM2, FM3 and AM preset station memories. play. Note: o Existing saved stations are overwritten with new stations after following this procedure. ¥W <=> 0! Broadcast station Clock display © Band Press [BAND] to select a desired band. (=> page 12) Preset number [DISP] (Display) Preset buttons from [1) to [6] Auto Preset Memory (ARM) Press and hold [BAND] (APM: auto preset memory) for more than 2 seconds. oThe 6 strongest available stations will be automatically saved in the memory under preset buttons from [1] to [6]. o Once set, the preset stations are sequentially scanned for 5 seconds each. Manual Preset Memory (3) Use manual or seek tuning to find a station. (^ page 12) © Press and hold one of the preset buttons from [1] to [6] until the display blinks once. Preset Station Calling Press the corresponding preset button from [1] to [6] to tune in a preset station. f. Caution: ©To ensure safety, never attempt to preset stations while you are driving. CD Player Basics Disc Insert and Playback Note: • Do not insert a disc when “DISC” indicator lights. Disc insert Playback will start automatically after the player recognized the loaded disc as an ordinary music CD. (When a CD-R or CD-RW which has CD-DA formatted data as the same as an ordinary music CD is loaded, this player recognizes it as an ordinary music CD.) “LOAd” will be displayed until the disc is loaded. Stop and Disc Eject Press [A] (eject) to stop CD play and eject the disc. During disc ejection, “EJ” (eject) will be displayed. Listening to a CD CD Player Mode (When a CD is in the player.) Press [SOURCE] to change to the CD play mode. Playback will start automatically. Source Radio CD player t (When a CD is inserted. __=3