valutazioni - 5, GPA: 3.6
(
)
)
|
Foto e specifiche LG LCF610IR |
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
2 Connecting abcd efgh abcd efgh a b c d e f g h AAAAAAAAA a Gray: Front Right + A b Gray/ Black Stripe: Front Right - A cViolet: Rear Right + A dViolet/ Black Stripe: Rear Right - A eWhite: Front Left + A fWhite/ Black Stripe: Front Left - A g Green: Rear Left + A h Green/ Black Stripe: Rear Left - Power Antenna Control Relay To Audio out To Audio in Amplifi er Rear Left (Sub-woofer Left) Front Left Rear Right (Sub-woofer Right) Front Right Amplifi er B f Power Antenna (Blue) B g Dimmer (Pink) B cTo Ignition (Red) B h Ground (-) (Black) B dTo Battery (+) (Yellow) B e Remote On (Blue/ White) B b Phone Mute (Orange) B a Not connected Dimmer Switch Ignition Switch Wired remote input (Black): Hard-wired control adapter can be connected. (Optional) 12 Operating Operation Basic operations 1. Turn the unit on by pressing any key on the unit. 2. Select a source by pressing SRC. 3. Rotate the volume knob to adjust the volume on the unit. Or press VOLUME W/S on the remote control. If a source is not connected to the unit, the source is not recognized. , Note Turning off the sound temporarily 1. Press to mute your unit. Or press MUTE on the remote control. 2. To cancel it, press again. Or press MUTE again. Using EQ (Equalizer) EQ is to increase or decrease the signal strength of audio frequencies. The function helps you to enjoy sound more plentifully. Press EQ on the unit repeatedly. The indicator lights up in the following order. XDSS+ / POP / CLASSIC / ROCK /JAZZ / VOCAL / SALSA / SAMBA /REGGAE /RUSSY /USER 1 /USER 2 / Off (not displayed) You can adjust sound level to your preference. Once you select a USER 1/2 mode and press ` , then adjust the sound level (BASS (bass), MID (middle), TRB (treble), BAL (left/right speaker), FAD (front/rear speaker), S--W (Sub- woofer: optional)), it will be automatically stored for the currently selected USER 1/2 mode. Refer to the "For [SOUND] setting" for USER 1/2 mode on the page 13. , Note Checking the clock 1. Press DISP to check the clock. 2. Press it again to remove it. Turning off the display light 1. Press and hold DISP. 2. Press and hold it again to turn it on. Under the light-off condition, press any keys, the light is turned on and then off automatically if you don't press it within a few seconds. , Note Resetting the unit You can reset the unit when it does not operate properly. 1. Detach the control panel. Refer to page 8-9 for detaching the control panel. 2. Press the RESET hole with a sharp object. [LCS510IR/ LCS510UR] [LCF610IR] 3 Operating Operating 13 Adjusting the general settings You can adjust [SOUND], [LIGHT] and [OTHER] settings. On the unit 1. Press `. 2. Rotate the volume knob to select [SOUND], [LIGHT], or [OTHER] and press it. 3. Rotate the volume knob to select the item and press it. 4. Rotate the volume knob clockwise or counterclockwise to adjust the level. 5. Press the volume knob to confirm the setting. If you want to return to the previous step, press . On the Remote Control 1. Press and hold FUNC/ • MENU. 2. Press w/ s to select [SOUND], [LIGHT], or [OTHER] and press ENTER. 3. Press w/ s to select the mode and press ENTER. 4. Press w/ s to adjust the level. 5. Press ENTER to confirm the setting. If you want to return to the previous step, press . For [SOUND] setting You can adjust sound quality by adjusting the level of BASS (bass), MID (middle), TRB (treble), BAL (left/ right speaker), FAD (front/rear speaker) and SWC (Sub woofer control). -When you set the EQ to USER 1/2 mode. : You can adjust the level of BASS (bass), MID (middle), TRB (treble) BAL (left/right speaker), FAD (front/rear speaker) and SWC (Sub woofer control). For [LIGHT] setting You can adjust the light effects by adjusting LED, DIM, or DIM L. • LED COL1/ COL2/ AUTO: You can change the LED window color. • DIM (Dimmer) OFF/ ON/ AUTO: You can change the brightness of the display window during the power-on status. Settings Description DIM ON The display window becomes dark. DIM OFF The display window becomes bright. DIM AUTO The dimmer operates according to the car dimmer setting. • DIM L (Dimmer Level): When you set DIM to ON/ AUTO, you can adjust the dimmer level. (-2, -1, 0, +1, +2) 3 Operating 14 Operating For [OTHER] setting • AUX (Auxiliary) ON/ OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to this unit. • DEMO OFF/ ON You can change the initial indication on the display to information name (function name, EQ name, etc...) while listening to a source. • SW (Subwoofer) OFF/ SW 55 Hz/ SW 85 Hz/ SW 120 Hz You can enable the subwoofer. SW OFF <-> SW 55 Hz <-> SW 85 Hz <-> SW 120 Hz. • A-EQ (Auto EQ) ON/ OFF AUTO EQ operates only in the music file supported with genre in the device. When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automatically selected according to the music genre. • BEEP 2ND/ ALL BEEP 2ND: The beep is generated when a key is pressed for longer than 2 seconds. BEEP A...