valutazioni - 5, GPA: 4.4
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Stereo - LCS720BO (1.09 mb)
DVD-Player - LCS720BO (1.08 mb)
Facilità d'uso
- Antenna / Remote port short: "ANTENNA/ REMOTE ON PORT SHORT CIRCUIT CHECK" After connecting it again, restart the unit. >Caution a b c d e f g h A a Gray : Front Right + A b Gray / Black Stripe: Front Right - A cViolet : Rear Right + A dViolet / Black Stripe: Rear Right - A eWhite : Front Left + A fWhite / Black Stripe: Front Left - A g Green : Rear Left + A h Green / Black Stripe: Rear Left - Operating 9 Operation Basic operations 1. Turn the unit on by pressing any key on the unit. 2. Select a source by pressing SRC. 3. Rotate the volume knob to adjust the volume on the unit. Or press VOLUME W / S on the remote control. Turning off the sound temporarily 1. Press MUTE to mute your unit. (When MP3/ WMA file is played, it will be paused.) Or press MUTE on the remote control. 2. Press it again to cancel Using EQ (Equalizer) EQ is to increase or decrease the signal strength of audio frequencies. The function helps you to enjoy sound more plentifully. Press EQ on the unit. And rotate the volume knob to select the item and press it. The indicator lights up in the following order. FLAT /B-BOOST (BASS BOOSTER) /POP / CLASSIC / ROCK / JAZZ /VOCAL / SALSA / SAMBA / REGGAE / RUSSY / USER EQ1 / USER EQ2 Using 3D SOUND/ MIRROR CD 3D SOUND: This mode delivers outstanding surround sound. MIRROR CD (MIRROR CD SOUND): This mode enhances the quality of compressed music file. Press and hold EQ/ • 3D. And rotate the volume knob to select the item and press it. The indicator lights up in the following order. OFF /3D SOUND / MIRROR CD .3D SOUND/ MIRROR CD is only available when you use the CD/ USB/ SD card. (Except iPod/iPhone) .When you are recording, 3D SOUND/ MIRROR CD will be turned off automatically. , Note Checking the clock 1. Press DISP. 2. Press it again to cancel. Turning off the display light 1. Press and hold DISP. 2. Press and hold it again to turn it on. Under the light-off condition, press any key, the light is turned on and then off automatically if you don't press it within a few seconds. , Note Resetting the unit You can reset the unit when it does not operate properly. 1. Detach the control panel. Refer to page 7 for detaching the control panel. 2. Press the RESET hole with a sharp object. [LCS720BO] [LCF820BO] Adjusting the general settings You can adjust [SOUND], [LIGHT] and [OTHER] settings. On the unit 1. Press and hold • MENU. 2. Rotate the volume knob to select [SOUND], [LIGHT], or [OTHER] and press it. 3. Rotate the volume knob to select the item and press it. 4. Rotate the volume knob clockwise or counterclockwise to adjust the level. 5. Press the volume knob to confirm the setting. If you want to return to the previous step, press . On the Remote Control 1. Press and hold FUNC / • MENU. 2. Press w / s to select [SOUND], [LIGHT], or [OTHER] and press ENTER. 3. Press w / s to select the mode and press ENTER. 4. Press w / s to adjust the level. 5. Press ENTER to confirm the setting. If you want to return to the previous step, press . Operating 3 10 Operating 3 Operating For [SOUND] setting You can adjust sound quality by adjusting the level BALANCE (left/right speaker), FADER (front/rear speaker), SW (Subwoofer), SW-F (Subwoofer frequency), A-EQ (Auto EQ). -When you set the EQ to USER EQ1/2 mode. : You can adjust the level of BAS (bass), MID (middle), TRB(treble). • SW (Subwoofer) You can adjust the volume of subwoofer. • SW-F (Subwoofer frequency) OFF/ SW 55 Hz/ SW 85 Hz/ SW 120 Hz You can enable the subwoofer. • A-EQ (Auto EQ) OFF/ ON AUTO EQ operates only in the music file supported with genre in the device. When you set AUTO EQ to ON, POP, CLASSIC, ROCK, or JAZZ is automatically selected according to the music genre. For [LIGHT] setting [LCS720BO] You can adjust the light eff ects by adjusting LED, DIM, or DIM LV. • LED COL1 / COL2 / AUTO : You can change the LED window color. • DIM (Dimmer) OFF / ON : You can change the brightness of the display window during the power-on status. Settings Description DIM ON The display window becomes dark. DIM OFF The display window becomes bright. • DIM LV (Dimmer Level) : When you set DIM to ON, you can adjust the dimmer level. (-2, -1, 0, +1, +2) [LCF820BO] You can adjust the light eff ects by adjusting LED MODE, USER LED, DIM, or DIM LV. • LED MODE : You can change the LED window color. LED AUTO/ LED USER / LED 01 to 27 • USER LED Making the desired LED color by adjusting the each level of RED, GREEN, and BLUE. (USER LED is only available when you set LED MODE to LED USER.) • DIM (Dimmer) OFF / ON : You can change the brightness of the display window during the power-on status. Settings Description DIM ON The display window becomes dark. DIM OFF The display window becomes bright. • DIM LV (Dimmer Level) : When you set DIM to ON, you can adjust the dimmer level. (-2, -1, 0, +1, +2) For [OTHER] setting • AUX (Auxiliary) ON / OFF It is possible to use auxiliary equipment with this unit. Activate the auxiliary setting when using auxiliary equipment connected to t...