DISP/ NAME.S Turning ON the Power Press the [SRC] button. When the power is ON, the (page 6). • Each setting value is changed with the (page 6). First, select the speaker type with the Speaker setting. Audio Control 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [AUD] button for at least 1 second. 3 Select the Audio item for adjustment Press the [FM] or [AM] button. Each time the switch as shown 4 Adjust the Audio item Press the [ 4] or [ . ] button. Adjustment Item Display Range Bass level "BAS" –8 — +8 Middle level "MID" –8 — +8 Treble level "TRE" –8 — +8 Balance "BAL" Left 15 — Right 15 Fader "FAD" Rear 15 — Front 15 Volume offset "V-OFF" –8 — ±0 Loudness "LOUD" ON/OFF • Volume offset: Each source's volume can be set as a difference from the basic volume. • Loudness: Compensating for low and high tones during low volume. 5 Exit Audio Control mode Press the [AUD] button. Speaker Setting Fine-tuning so that the System Q value is optimal when setting the speaker type. 1 Enter Standby Press the [SRC] button. Select the "ALL OFF" display. 2 Enter Speaker Setting mode Press the [Q] button. 3 Select the Speaker type Press the [ 4] or [ . ] button. — 6— Each time the below. Each time the below. OFF "SP OFF" For 5 & 4 in. speaker "SP 5/4" For 6 & 6x9 in. speaker "SP 6*9/6" For the OEM speaker "SP OEM" 4 Exit Speaker Setting mode Press the [Q] button. Switching Display Switching the information displayed. Press the [DISP] button. Each time the button is pressed the display switches as shown below. In Tuner source Information Display Station name or Frequency "SNPS" Frequency "BAND+F" Clock In Tape source Information Play side Tape running & Tape counter Tape running Clock In External disc Information Disc title Track title Display "D-TITLE" "T-TITLE" Track number & Play time "P-TIME" Disc name "DNPS" Clock In Auxiliary input source Information Auxiliary input name Clock If the Disc title or Track title is selected when the disc which does not have disc title or track title is played, track number and play are displayed. — 7— General General Station/Disc Attaching a title to 1 Receive/play the station/ • A title can't be attached to a MD. • Refer to the "DNPS" or "SNPS". 2 Enter name set mode Press the [NAME.S] button for at least "NAME SET" is displayed. 3 Move the cursor to the enter character position Press the [ 4] or [ . ] button. 4 Select the characters Press the [FM] or [AM] button. Characters can be entered by using a remote with a number buttons. Example: If "DANCE" is entered. Character Button Times pressed "D" [3] 1 "A" [2] 1 "N" [6] 2 "C" [2] 3 "E" [3] 2 5 Repeat steps 3 through 4 and enter the name. 6 Exit name set mode Press the [NAME.S] button. • When operation registered, and Name • Memory numbers - FM: 32 stations - AM: 16 stations - External CD changer/ player: Varies according to the CD changer/ player. Refer to the CD changer/ player manual. • The title of station/CD can be changed used to name it. Auxiliary Input Display Setting Selecting the display when this device is switched input source. 1 Select Auxiliary input source Press the [SRC] button. Select the "AUX1" display. 2 Enter Auxiliary input display setting mode Press the [NAME.S] button for at least 2 seconds. The presently selected AUX Name is blinks. 3 Select the Auxiliary input display Press the [ 4] or [ . ] button. Each time the button is pressed it switches through the below displays. • "AUX1" • "TV" • "VIDEO" • "GAME" • "PORTABLE" • "DVD" 4 Exit Auxiliary input display setting mode Press the [NAME.S] button. — 8— Theft Deterrent Faceplate The faceplate of the unit can be helping to deter theft. Removing the Faceplate 1 Press the Release button. Drop open the faceplate. 2 Drawing the faceplate to left side pull it to the front remove it. 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you • The faceplate is a precision piece of equipment and can be damaged by shocks or jolts. For that reason, keep the faceplate in its special storage case while detached. • Do not expose the faceplate or its storage case to direct sunlight o...
Questo manuale è adatto anche per i modelli : Unità - KRC-669 (498.07 kb)
Log: