valutazioni - 2, GPA: 3.5 ( )

Produttore : Kenwood File Size : 10.06 mb File Nome : Lingua di insegnamento:

2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (page 47) 4 Calls the Sound Effects Menu. 5 Adjusts the bass boost of the B.M.S power amplifier (optional accessory). • You may not set some models of power amp boost to "+18". See the catalog or instruction manual of power amplifier. 6 Sets the center frequency of bass boost you have set for "AMP Bass". (optional accessory) If you set the center frequency to "Low", it will be dropped approximately 20% to 30%. 7 Displays the Parametric Equalizer screen. (page 77) You can adjust the value set for the Equalizer Curve Type. 8 Selects an equalizer curve type. You can select any of the following equalizer curves. • "Natural" • "Rock" • "Pops" • "Easy" • "Top40" • "Jazz" • Equalizer curve can be set for each source. 76 | English Sound Effects Menu Sound Effects Menu Parametric Equalizer 5 Set a gain You can manually set the equalizer curve by adjusting the center frequency, gain and Q value. 1 Display the Parametric Equalizer screen 6 Set a Q value P-EQ Q- Flat RearFront Q+ Center Frq 315Hz Gain -7dB Q 0.25 Frq 1.6kHz Gain +9dB Q 0.50 Frq 16kHz Gain -7dB Q 0.50 Return Parametric Equalizer Frq 80Hz Gain +9dB Q 1.00 Band1 Band2 Band3 Band4 6 7 8 1 1 1 1 6 7 85432 119 10 7 Close the Parametric Equalizer screen Q-Q+ Return 1 Adjusts the volume. 2345 Select a band to be adjusted. 6 Sets a frequency. 7 Sets a gain level. 8 Sets a Q value. 9 Tone curve becomes flat. 0 Select a channel to be adjusted. -Exits the Parametric Equalizer setup and returns to the Equalizer screen. 2 Select a channel you wish to adjust Front Rear Center 3 Select a frequency band you wish to adjust Band1 — Band4 You can adjust the following frequency bands. Band1: 60, 80, 100, 120, 160, 200 Hz Band2: 250, 315, 400, 500, 630, 800, 1k Hz Band3: 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k Hz Band4: 5k, 6.3k, 8k, 10k, 12.5k, 16k Hz 4 Set a center frequency English | 77 Surround Control You can set up the sound field. Displaying the Surround Control screen Surround Control Surround Control screen Adjust MENU Stream Information Dolby Digital 2/0 48kHz Dolby PLMusic 1 2 4 1 1 1 3 6 5 7 5 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (page 47) 4 Calls the Sound Effects Menu. 5 Sets a sound field. You can select any of the following sound fields. • "Bypass" • "Bypass+Center" • "Dolby PLII Movie" • "Dolby PLII Music" • "Dolby PLII Matrix" • "SRS CS II Music" • "SRS CS II MONO" 6 Displays the present source information. The stream (Dolby Digital, dts, Linear PCM, MPEG or MP3/WMA), input channels (front or rear channels), and sampling frequency are displayed. 7 Displays the Surround Control Adjustment screen. (See , page 79) • When you have selected the TV or TUNER source and when you set the Dolby PL, we recommend you to select the "Dolby PLII Matrix" mode. If you select another Dolby PLII mode, the sound is NOT output from rear speakers when you receive monaural broadcasting sounds. • Surround control can be set for each source. 78 | English Sound Effects Menu Sound Effects Menu Surround Control Adjustment You can adjust the sound field. 1 Display the Surround Control screen Adjust Surround Control Adjust screen If the sound field of "Dolby PLII Music" has been set: Return Dimention Control 5 Center Width Control Neutral PL Adjust OffPanorama Mode 1 2 3 4 51 1 1 2 3 • You cannot use the during playback of Multi channel source, "dts", and "Dolby Digital". • You cannot use the when the sound field of "Dolby PLII Movie", or "Dolby PLII Matrix" has been set. 2 Adjust the sound field 3 Exit the Surround Control adjustment Return 1 Adjusts the volume. 2 Sets the surround position by adjusting the front and rear volume balance. 3 Sets the vocal image position by adjusting the right and left vocal volume level. 4 Turns the Panorama mode On or Off. 5 Enters your setup and returns to the Surround Control screen. If the sound field of "SRS CS II " has been set: Return 3 Mix to Rear(Center) 1 Mix to Rear(Front) CS Adjust 6 6 7 7 6 Sets the surround position by adjusting the front and rear volume balance. 7 Adjusts the center audio mix to rear volume. English | 79 SRS WOW Control You can set up the SRS WOW effect. Displaying the SRS WOW Control screen SRS WOW SRS WOW Control screen Adjust MENU Middle Middle 1 2 4 1 1 1 3 6 55 1 Adjusts the volume. 2 Returns to the Control screen of the previous source. 3 Calls the Setup Menu. (page 47) 4 Calls the Sound Effects Menu. 5 Sets a SRS WOW. You can select any of the following sound fields. • "Off" • "Low" • "Middle" • "High" • "User" 6 Displays the SRS WOW User Setup screen. (page 81) • It is not effective though SRS WOW can be set besides "Off" when you set to "Dolby PLII". Set to "Bypass" or "SRS CS II" if you expect SRS WOW sound effect. Table of Sound Effect Menu You can s...

Scarica la tua

Per scaricare, digitare 2 cifre :