valutazioni - 6, GPA: 4 ( )

Produttore : Kenwood File Size : 723.79 kb File Nome : Lingua di insegnamento:

• Do not expose the faceplate or its storage case to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water splashing. Reattaching the Faceplate 1 Align the projections on the unit with the grooves on the faceplate. Projections Grooves 2 Push the faceplate in until it clicks. The faceplate is locked in place, allowing you to use the unit. General features English | 11 Tuner features Function of the KDC-MP4029/MP4029G/MP3029/3029/2029 Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Push the Control knob to [4] or [.]. • During reception of stereo stations the "ST" indicator is ON. Tuning Mode Choose the tuning mode. Press the [AUTO] button. Each time the button is pressed, the Tuning mode switches as shown below. Tuning mode Display Operation Auto seek "AUTO 1" Automatic search for a station. Preset station seek "AUTO 2" Search in order of the stations in the Preset memory. Manual "MANUAL" Normal manual tuning control. OFF SCAN RDM REP VOL Q AUD SET UP MENU ATT DIM AUTO AME DISP SCRL + - SRC AUTO/ AME 1 - 6 Band display Frequency display Preset station number ST indicator Control knob 12 | English Tuner features Function of the KDC-MP4029/MP4029G/MP3029/3029/2029 Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Control knob to [FM] or [AM]. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. Preset Tuning Calling up the stations in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. 2 Call up the station Press the desired [1] — [6] button. Frequency Step Setting Changing the tuning frequency step. The original setting is FM band 50 kHz, and AM band 9 kHz. 1 Turn the power OFF Press the [SRC] button for at least 1 second. 2 Switch the frequency step While pressing the [1] and [5] button, press the [SRC] button. Release your fingers from the button after the display is appeared. The frequency step changes to FM band 200 kHz, and AM band 10 kHz. • When the same operation is repeated, it returns to the original setting. • When the frequency step is switched, the frequencies in the memory are deleted. Station Preset Memory Putting the station in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob to [4] or [.]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. English | 13 Tuner features Function of the KDC-3029R Tuning Selecting the station. 1 Select tuner source Press the [SRC] button. Select the "TUNER" display. 2 Select the band Push the Control knob to [FM] or [AM]. Each time the knob is pushed to [FM], it switches between the FM1, FM2, and FM3 bands. 3 Tune up or down band Push the Control knob to [4] or [.]. • During reception of stereo stations the "ST" indicator is ON. Station Preset Memory Putting the station in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. 2 Select the frequency to put in the memory Push the Control knob to [4] or [.]. 3 Put the frequency in the memory Press the desired [1] — [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 station can be put in the memory on each [1] — [6] button. OFF SCAN RDM REP VOL Q AUD SET UP MENU ATT DIM TI AME DISP SCRL + - SRC 1 - 6 AME Band display Frequency display Preset station number ST indicator Control knob 14 | English Tuner features Function of the KDC-3029R Preset Tuning Calling up the stations in the memory. 1 Select the band Push the Control knob to [FM] or [AM]. 2 Call up the station Press the desired [1] — [6] button. Auto Memory Entry Putting stations with good reception in the memory automatically. 1 Select the band for Auto Memory Entry Push the Control knob to [FM] or [AM]. 2 Open Auto Memory Entry Press the [AME] button for at least 2 seconds. When 6 stations that can be received are put in the memory Auto Memory Entry closes. • When the (page 24) is ON, only RDS stations are put in the memory. • When Auto Memory Entry is done in the FM2 band, the RDS stations preset in the FM1 band aren’t put in the memory. Likewise, when it is done in the FM3 band, RDS stations preset in FM1 or FM2 aren’t put in the memory. English | 15 RDS features Function of the KDC-3029R Traffic Information Switching to traffic information automatically when a traffic bulletin starts even when you aren’t listening to the radio. Press the [TI] button. Each time t...

Scarica la tua

Per scaricare, digitare 2 cifre :