valutazioni - 3, GPA: 4 ( )

Produttore : Kenwood File Size : 461.92 kb File Nome : Lingua di insegnamento:

Characters that can be displayed are as follows. Alphabet (upper case) : A ~ Z Numerals and symbols : 0~9 @ ” ‘ ` % & * + - = , . / \ < > [ ] NOTE The operation and characters that can be entered may change as listed below, depending on the unit that is connected. Press the DISC+ or DISC– button to display the desired character. Besides the alphabet (capital letters only) and numbers, you can choose the following characters: /, + , – , *, =, <, >, [ and ]. 5 Continue steps 3 and 4 until all the characters are chosen for the name. NOTE You can enter up to 8 characters for each name. 6 Press either the NAME.S button on the main unit or the OK button on the remote control. The disc name is stored and the disc name preset mode is cancelled. If you make no entry in a 10-second period, the name will be stored with the characters entered so far. • The number of depending on the your disc changer manual • Discs are identified by you play another CD that specifications as another CD name will be displayed for it. • If you want to change the name to display the name, and then repeat changes. • Pressing the reset button erases the disc unit, but does not erase the names stored NOTE — 19 — CD/External disc control features Menu settings Function of the KDC-4080R/KDC-4080RV Text Scroll English This function permits to be displayed. The scrolling setting of scrolling in the To scroll manually: 1 Press the CLK button to display 2 Holding down the CLK button for one one scrolling display of the titles. To scroll automatically:1 Press the CLK button to display the disc title The titles will be displayed in one scrolling display. NOTE When the disc or track to be played changes, the title in one scrolling display. 2 Holding down the CLK button for one second or more results one scrolling display of the titles. FM . #1-6 LOUD PWR OFF PTY MENU CLKSCAN RDM REP D.SCN M.RDM DISC TI SRCSRC AMMENU 4 NOTE • Please see the menu settings (page 24) about switching between manual scrolling and automatic scrolling. • Only units with a CD text feature permit title display. Menu display — 20 — Menu System Touch Sensor You can set the defaults mode. Make a setting for each operations. 1 Enter the menu mode Hold down the MENU button for "MENU" is displayed when the menu The function that you can adjust is indicated settings displayed. 2 Selecting function to set Press the FM button to search through the functions see the one you want to adjust in the display. Press the AM button to search through the functions Example: If you want to the setting of the touch sensor tone function from on to off, first search through the functions until you see "BEEP ON" in the display. 3 Changing setting for currently displayed function Press either the 4 or . button. The setting will change for each function. Example: The setting of the touch sensor tone will switch from on to off, and "BEEP OFF" is displayed. 4 Ending the menu mode Press the MENU button. NOTE Make sure to end the menu mode when finished. If you fail to end the menu mode, several functions may not operate properly, including the Traffic Information function and the Alarm function. This function produces operation. It can be Display and setting: "BEEP ON": Beep setting is "BEEP OFF": Beep setting is off. NOTE The beep sound is not output from the Manual Time Adjustment Adjust the time manually. NOTE This adjustment is available only when the automatic time adjustment is set to off. Display and setting: 1 Select the display "CLK ADJ" during the selecting function in the menu system. 2 Hold down either the 4 or . button for two seconds or more to enter the Manual time adjustment mode. The time display will blink. 3 • Adjusting the hours Press the FM button to advance the hours, or press the AM button to make the hours go back. • Adjusting the minutes Press the . button to advance the minutes, or press the 4 button to make the minutes go back. — 21 — Menu settings English Automatic Time With automatic time automatically according (after receiving RDS signals set the time manually if is turned off. The factory default Display and setting: "SYNC ON": Automatic time adjustment "SYNC OFF": Manual time adjustment Adjusting Time Automatically: Tune into an RDS station for 3 or 4 minutes. The time adjusts automatically to the correct NOTE Function of the KDC-4080R/KDC-4080RV Selectable Illumination You can switch the green and red. Display and setting: "COL GRN": The colour of the "COL RED": The colour of the illumination News Bulletin Function with PTY News Timeout Setting The time is not adjusted when the RDS station you not transmitting a time signal. Choose another RDS station such a case. Disabled System Indicator (DSI) A red indicator blinks on the unit after the faceplate is removed, warning potential thieves. The factory default for this function is "ON". Display and setting: "DSI ON": The disabled system indicator is on. "DSI OFF": The disabled system indicator is off. You can arrange to have ...

Scarica la tua

Per scaricare, digitare 2 cifre :