valutazioni - 2, GPA: 4.5
(
)
)
|
Facilità d'uso
• The functions that can be used and the information that can be displayed will differ depending on the external disc players being connected. Cleaning the Faceplate Terminals If the terminals on dirty, wipe them with Cleaning the Unit If the faceplate of this unit is stained, with a dry soft cloth such as a silicon If the faceplate is stained badly, wipe stain off with a cloth moistened with cleaner, then wipe neutral detergent off. 2 CAUTION Applying spray cleaner directly to the unit may affect its mechanical parts. Wiping the faceplate with a hard cloth or using a volatile liquid such as thinner or alcohol may scratch the surface or erases characters. The marking of products using lasers (Except for some areas) CLASS 1 LASER PRODUCT The label is attached to the chassis/case and says that the component uses laser beams that have been classified as Class 1. It means that the unit is utilizing laser beams that are of a weaker class. There is no danger of hazardous radiation outside the unit. Cleaning the CD Slot As dust can accumulate it occasionally. Your you put them in a dusty Lens Fogging Right after you turn on the car heater in cold weather, dew or condensation may form on the lens in the CD player of the unit. Called lens fogging, CDs may be impossible to play. In such a situation, remove the disc and wait for the condensation to evaporate. If the unit still does not operate normally after a whilst, consult your Kenwood dealer. — 4— Handling Compact discs Playing a CD that is dirty, scratched or warped can cause the sound to skip and the unit to operate incorrectly, resulting in worsened sound quality. Take the following precautions to prevent your CDs from getting scratched or damaged. Handling CDs • Do not touch the recorded side of the CD (i.e., the side opposite the label) when holding it. • The reflective film on a CD-R or a CD-RW is more fragile than that on an ordinary music CD, and may peel off if scratched. Fingerprints on a CD-R or CD-RW are also more likely to cause skipping when the disc is played. For these reasons, handle the disc very carefully. Detailed handling instructions will appear on the CD-R or CDRW package: read this information carefully before using the disc. • Do not stick tape on either side of the CD. Tape Storing CDs • Do not store CDs sunlight – such as a fascia panel (dashboard) places. A CD-R or CD-RW is more susceptible a music CD to damage from high temperatures and humidity, and in cases, may become unusable if left car for long periods of time. • Remove CDs from the unit when not listening to them for a whilst, and put them back in their cases. Do not stack CDs that have been removed from their cases or prop them against something. Cleaning CDs If a CD has become dirty, wipe it off gently using a commercially available cleaning cloth or a soft cotton cloth, starting from the centre of the disc and moving outward. Do not clean CDs with conventional record cleaners, anti- static formulas, or chemicals such as paint thinner or benzene. Checking New CDs for Burrs When playing a new check that there are the perimeter of the disc hole. CDs with burrs stuck load properly or may skip whilst Remove burrs using a ballpoint similar utensil. Burrs Burrs — 5— English Handling Compact discs Do Not Load CD Accessories in Slot Do not use commercially accessories that can slot, such as stabilisers, or CD cleaning discs, since the unit to malfunction. Removing the CD Only remove the CD from the machine horizontal direction. You may damage the surface of the CD if you try pulling it down as it ejects. Do Not Use Special Shape CDs • Be sure to use round this unit and do not use CDs. Use of special shape the unit to malfunction. • Be sure to use CDs with disc mark only for this unit. • CD-Rs and CD-RWs which have not undergone finalization processing cannot be played. (For more information on finalization processing, refer to the manual for your CD-R/CD-RW writing software or CD-R/CDRW recorder.) Additionally, depending on the recording status, it may prove impossible to play certain CDs recorded on CD-R or CD-RW. Do Not Use CDs with Sticker on the Labelled Side Do not use the CD with stuck on it. Using such a CD may cause deformed and the sticker to resulting in malfunction of the — 6— General features Power Release button Q/ AUD 4/ . . FM/ AMATT/ u d SRC/ PWR OFF LOUD LOUD indicator ATT indicator SYSTEM Q indicator Turning on the power: Press the SRC button. NOTE Turn the power on before carrying Turning off the power: Hold down the PWR OFF button for Volume Increasing Volume: Press the u button to turn up the volume. Decreasing Volume: Press the d button to turn down the volume. Attenuator This function allows you to turn down the volume quickly. Turning Attenuator On/Off: Press the ATT button to switch the attenuator on and off. When the attenuator is on, the ATT indicator blinks. When the attenuator is off, the volume returns to the original level. NOTE Turning the volume up, or...
Questo manuale è adatto anche per i modelli :Unità - KDC-305RA (588.59 kb)
Unità - KDC-305RG (588.59 kb)
Unità - KDC-3090RA (588.59 kb)
Unità - KDC-3090RG (588.59 kb)