valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
"Approved" is displayed. The unit can be used. • If an incorrect code is input, "Waiting" is displayed, and the input prohibited time shown below is generated. After the input prohibited time lapses, "CODE" is displayed, and input can be done. Number of times the incorrect code was input Input prohibited time 1 — 2 5 minutes 3 1 hour 4 24 hours 24 | English B.M.S. (Bass Management System) Adjust the bass boost level of the external amplifier using the main unit. Display Setting "AMP Bass Flat" Bass boost level is flat. "AMP Bass +6" Bass boost level is low (+6dB). "AMP Bass +12" Bass boost level is mid (+12dB). "AMP Bass +18" Bass boost level is high (+18dB). When the Dual Zone System is OFF Dual Zone System Setting Setting the Front channel and Rear channel sound in the Dual Zone System. Display Setting "Zone 2 Rear" The front is this unit’s internal source, and the rear is selected source sound. "Zone 2 Front" The rear is this unit’s internal source, and the front is selected source sound. In External disc, or Auxiliary input source Dual Zone System Makes the sound different for the front channel and rear channel. Display Setting "Zone 2 OFF" The front and rear are the same source sound. "Zone 2 ON" The front and rear are the different source sound. • When the Dual Zone System is on, there is only sound effect including Audio control for internal source. • When you set the Dual zone system to ON while the subwoofer preout is switched ON, the sound of the subwoofer preout isn’t output. • When the source is selected to VZ-7000P/N (optional accessory), the VZ-7000P/N’s sound is not output if the Dual Zone System is turned ON. Display Setting "AMP Mute OFF" The built-in amplifier activates. "AMP Mute ON" The built-in amplifier deactivates. In Standby mode Built-in Amp Mute Setting Toggles ON or OFF the mute control on the builtin amplifier. Turning ON this control enhances the preout quality. In Standby mode Switching preout Switching the preout between the rear and subwoofer. (In subwoofer it outputs without effect from the fader control.) Display Setting "SWPRE Rear" Rear preout. "SWPRE Sub-W" Subwoofer preout. System Q Setting Setting whether the display indicates the System Q factors (Bass center frequency, Bass Q factor, Bass extend, Middle center frequency, Middle Q factor, and Treble center frequency) in Audio control. Display Setting "System Q ON" The System Q factors are displayed. "System Q OFF" The System Q factors aren’t displayed. Dimmer Dimming this unit’s display automatically when the vehicle light switch is turned ON. Display Setting "Dimmer ON" The display dims. "Dimmer OFF" The display doesn’t dim. Selectable Illumination Selecting the button illumination color as green or red. Display Setting "Button Red" The illumination color is red. "Button Green" The illumination color is green. Menu system English | 25 When LX AMP unit connecting AMP Control You can control the LX AMP connected to the unit. 1 Select AMP Control mode Press the [FM] or [AM] button. Select the "AMP Control" display. 2 Enter AMP Control mode Press the [4] or [.] button for at least 1 second. 3 Select the AMP Control item for adjustment Press the [FM] or [AM] button. • For the details of the AMP Control item, see the Instruction manual attached to the LX AMP. 4 Adjust the AMP Control item Press the [4] or [.] button. 5 Exit AMP Control mode Press the [MENU] button. • You cannot use the LX AMP operation during standby mode. Function of the KDC-MP858 In Standby mode CD Read Setting When there is a problem on playing a CD with special format, this setting play the CD by force. Display Setting "CD Read 1" Play CD and MP3/WMA. "CD Read 2" Play CD by force. • Setting "CD Read 2" cannot play MP3/WMA. Some music CDs may not be played back even in the "CD Read 2" mode. Built-in Auxiliary input Setting Set the Built-in Auxiliary Input function. Display Setting "AUX OFF" When selecting the source there’s no Auxiliary Input. "AUX ON" When selecting the source there’s Auxiliary Input. Text Scroll Setting the displayed text scroll. Display Setting "Scroll Auto" Repeats scroll. "Scroll Manual" Scrolls when the display changes. • The text scrolled is shown below. - CD text - Folder name/ File name/ Song title/ Artist name/ Album name - MD title In FM reception CRSC (Clean Reception System Circuit) Temporarily have reception switched from stereo to mono to reduce multi-path noise when listening to the FM station. Display Setting "CRSC ON" The CRSC is ON. "CRSC OFF" The CRSC is OFF. • Strong electrical fields (such as from power lines) may cause unstable sound quality when CRSC is turned ON. In such a situation, turn it OFF. B.M.S. Frequency Offset Setting the central frequency boosted by B.M.S. Display Setting "AMP FREQ Normal" Boost with the normal central frequency. "AMP FREQ Low" Drop the normal central frequency 20%. • Refer to the catalog or instruction manual for power amplifiers that can be controlled from this unit. • For amplifier...
Questo manuale è adatto anche per i modelli :Unità - KDC-MP858 (680.58 kb)