valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
• A CD-R or CD-RW is more music CD to damage humidity, and in unusable if left • Remove CDs from the unit when not listening to them for a while, and put them back in their cases. Do not pile up CDs that are removed from their cases or prop them against something. Cleaning CDs If a CD has gotten dirty, wipe it off gently using a commercially available cleaning cloth or a soft cotton cloth, starting from the center of the disc and moving outward. Do not clean CDs with conventional record cleaners, anti-static formulas, or chemicals such as paint thinner or benzene. Checking New CDs for Burrs When playing a new CD for the first time, check that there are not any burrs stuck to the perimeter of the disc or in the central hole. CDs with burrs stuck on them may not load properly or may skip while playing. Remove burrs using a ballpoint pen or a similar utensil. Burrs Burrs Do Not Load CD Accessories Do not use commercially available CD accessories that can be loaded into the CD slot, such as stabilizers, protective sheets, or CD cleaning discs, since they can cause the unit to malfunction. 2CAUTION Do Not Use Special Shape CDs • Be sure to use round shape CDs only for this unit and do not use any special shape CDs. Use of special shape CDs may cause the unit to malfunction. • This unit can only play the CDs with . It may not correctly play disks which do not have the mark. • CD-Rs and CD-RWs which have not undergone finalization processing cannot be played. (For more information on finalization processing, refer to the manual for your CD-R/CD-RW writing software or CD-R/CD-RW recorder.) Additionally, depending on the recording status, it may prove impossible to play certain CDs recorded or CD-RW. Do Not Use CDs with Sticker Labeled Side Do not use the CD with the Using such a CD may cause deformed and the sticker malfunction of the — 5— Loading Compact Discs Loading Compact Discs 1 "KENWOOD" ' Projection Make sure the disc magazine is the right way up with the Kenwood logo on the top.Pull the tray out by the projection. 2 ' Place the disc on the tray with the label facing upwards. Insert the tray into the disc magazine until it locks. The discs are numbered from the bottom from 1 to 10. 2CAUTION • Take care to insert the tray correct grooves in the disc • 8-cm discs cannot be If an 8-cm disc adapter is used, the • Keep all the trays when empty. 3 Open the CD changer door. 4 ' Insert the magazine into until it clicks. 5 Close the CD changer door. NOTE Use the CD changer with its door closed to prevent the entry of dust into the changer. 6 Magazine ejection ' Open the CD changer door, and press "EJECT" button. NOTE Be sure to open the door pressing the EJECT completely open, door and cause — 6— Buttons Operations Display Unit Remote CD AUTO CHANGER CONTROLLER REP RDM 3 - + 4 . PWR ' M.RDM D.REP TRACK DISC 8/ D.SCN MHz DISCTRACKTRACK FREQ LEVEL - / + buttons PWR button 4 / . buttons 6 button RDM button REP button T. UP button + button T. DOWN button - button RDM button 38 button Buttons Operations Display Unit Remote CD AUTO CHANGER CONTROLLER REP RDM 3 - + 4 . PWR ' M.RDM D.REP TRACK DISC 8/ D.SCN MHz DISCTRACKTRACK FREQ LEVEL - / + buttons PWR button 4 / . buttons 6 button RDM button REP button T. UP button + button T. DOWN button - button RDM button 38 button SCAN button Number buttons SCAN (M.RDM) D.DOWN RDM D. REPEAT 1 2 3 4 5 6 7 8 9 0 38 REP T.DOWN T. UP D.UP POWER Set the car radio FM station to 88.3 MHz. See Page 11 for more information on changing the transmission frequency. Playing CDs Playing CDs : Press the PWR (POWER...Remote) button. The power goes ON and the CD play start. When the unit receives any signal from the remote controller, the mark lights up. TRACK DISC Play indicator Disc No. Pause indicator Track No. When the player reaches the end of the last track on the disc you are playing, it will shift automatically to the first track on the next disc. When the player plays the last disc, it will return to the first disc. The play display blinks during disc replacement. Disc No. 10 is displayed as "0" . Power off : Press the PWR (POWER...Remote) button. The power goes OFF. To listen to the radio : Press the PWR (POWER...Remote) button. The FM modulator is turned OFF and the Pause : Press the 6 ( 38...Remote) button. Disc play is temporarily paused. If you press the switch once the paused part. NOTE • Be sure to turn down radio or a cassette • During the disc receive ordinary switched — 7— English English Fast Forwarding and Reversing Disc Play Disc Search Fast Forwarding Disc Play : Hold down on the . button. Release your finger to play the disc at that point. Reversing Disc Play : Hold down on the 4 button. Release your finger to play the disc at the point. Track Search Search forward or backward through the tracks on the disc until you reach the one that you want to listen to. Making a Reverse Track Search : Press the 4 (T. DOWN...Remote) button to display the desired track number. Press once to...