Istruzioni per l'uso Kenwood, Modello KDC-MP628
Produttore : Kenwood File Size : 2.4 mb File Nome :
Lingua di insegnamento:
Vai a scaricare
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Attenuator Turning the volume down quickly. Press the [ATT] button. Each time the button is pressed, the Attenuator turns ON and OFF. When it’s ON, "ATT" is displayed. Function of the KDC-MP7028/KDC-MP728/KDCX789/ KDC-MP628 Audio Control NEXT/ MENU 1 – 6 SRC ATT VOL ANG Release button Control knob NEXT/ SRC MENU 1 – 6 ATT VOL ANG Release button Control knob English | 11 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Basic Audio item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. 4 Adjust the Basic Audio item Turn the [VOL] knob. Adjustment Item Display Range Rear Volume *1 "Rear Volume" 0 — 35 Subwoofer level*2,3,4 "Sub-WLevel" –15 — +15 Bass level*5 "Bass Level" –8 — +8 Middle level*5 "Middle Level" –8 — +8 Treble level*5 "Treble Level" –8 — +8 Balance "Balance" Left 15 — Right 15 Fader*4 "Fader" Rear 15 — Front 15 Exit Audio Control mode • *1 You can control this item when "2 ZONE" of (page 12) is set to "ON". • *2 You can control this item when (page 43) is set to "SWPRE Sub-W". (KDC-MP728/ KDC-MP628 only) • *3 You can control this item when (page 14) is set to "SW ON". • *4 You can control this item when "2 ZONE" of (page 12) is set to "OFF". • *5 These items can be adjusted in detail by the following methods. (Function of the KDC-X789) • *5 Source tone memory: The set up value is put in the memory per source. (Detail Audio item is included) 5 Exit Audio Control mode Press any button. Press the button which is not [VOL] knob and [ATT]/[ANG] button. Adjust the detail of Audio Control (Function of the KDC-X789) 1 Select the Audio item for adjustment By referring to the step 1 — 3 above, select the desired item to be set in detail from the items marked with *5. 2 Enter Detail adjustment mode of Audio Control Press the [VOL] knob for at least 1 second. 3 Select the Detail Audio item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. 4 Adjust the Detail Audio item Turn the [VOL] knob. Bass level Adjustment Item Display Range Bass Center Frequency "Bass FRQ" 40/50/60/70/80/100/ 120/150 Hz Bass Q Factor "Bass Q Factor" 1.00/1.25/1.50/2.00 Bass Extend "Bass EXT" OFF/ON Middle level Adjustment Item Display Range Middle Center Frequency "Middle FRQ" 0.5/1.0/1.5/2.0 kHz Middle Q Factor "Middle Q Factor" 1.00/2.00 Treble level Adjustment Item Display Range Treble Center Frequency "Treble FRQ" 10.0/12.5/15.0/17.5 kHz 5 Exit the Detail Audio Control mode Press the [VOL] knob for at least 1 second. • When the Bass Extend is set to ON, low frequency response is extended by 20%. • You can exit the Audio Control mode at anytime by pressing any button except for [VOL] and [ATT]/[ANG] buttons. 12 | English General features Function of the KDC-X889/KDC-MP828 Audio Control 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Control mode Press the [VOL] knob. 3 Select the Audio item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. 4 Adjust the Audio item Turn the [VOL] knob. Adjustment Item Display Range Rear Volume *1 "Rear Volume" 0 — 35 Subwoofer level*2,3 "Sub-WLevel" –15 — +15 Balance "Balance" Left 15 — Right 15 Fader*3 "Fader" Rear 15 — Front 15 Exit Audio Control mode • *1 You can control this item when "2 ZONE" of (page 13) is set to "ON". • *2 You can control this item when (page 14) is set to "SW ON". • *2 You can control this item when Speaker Select Subwoofer of (page 15) is set to any item other than "None". • *3 You can control this item when "2 ZONE" of (page 13) is set to "OFF". 5 Exit Audio Control mode Press any button. Press the button which is not [VOL] knob and [ATT]/[ANG] button. Function of the KDC-MP7028/KDC-MP728/KDCX789/ KDC-MP628 Audio Setup Setting the Sound system, such as Cross over Network. 1 Select the source for adjustment Press the [SRC] button. 2 Enter Audio Setup mode Press the [VOL] knob for at least 1 second. 3 Select the Audio Setup item for adjustment Press the [VOL] knob. Each time the knob is pressed, the items that can be adjusted switch as shown below. 4 Setup the Audio item Turn the [VOL] knob. Adjustment Item Display Range Front High Pass Filter*2 (KDC-MP728/MP628) (KDC-MP7028/X789) "HPF-F Fc" Through/80/100/120/150 /180 Hz Through/40/60/80/100/120/ 150/180/220 Hz Rear High Pass Filter*2 (KDC-MP728/MP628) (KDC-MP7028/X789) "HPF-R Fc" Through/80/100/120/150/ 180 Hz Through/40/60/80/100/120/ 150/180/220 Hz Low Pass Filter*1,2 (KDC-MP728/MP628) (KDC-MP7028/X789) "LPF-SW" 60/80/120/Through Hz 50/60/80/100/120/ Through Hz Subwoofer Phase*1,2 "SW Phase" Reverse (180°)/ Normal (0°) Volume offset "Vol-Offset" –8 — 0 Loudness "LOUD" OFF/ON Dual...
Questo manuale è adatto anche per i modelli :
Unità - KDC-MP7028 (2.4 mb)
Unità - KDC-MP728 (2.4 mb)
Unità - KDC-MP828 (2.4 mb)
Unità - KDC-X789 (2.4 mb)
Scrivi la tua opinione del dispositivo
)
