Log:
valutazioni - 2, GPA: 3.5 ( )

Istruzioni per l'uso Kenwood, Modello KDC-U549BT

Produttore : Kenwood
File Size : 857.94 kb
File Nome :
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


T: Toyota cars N: Nissan cars Removing the unit 1 Detach the faceplate A. 2 Engage the catch pin on the removal tools E into the holes on both sides of the escutcheon B, then pull it out. 3 Insert the removal tools E deeply into the slots on each side, then follow the arrows instructions as shown on the right. English 33 123BAEEC Troubleshooting Symptom Remedy/Cause Sound cannot be heard. “PROTECT” appears and no operations can be done. The unit does not work at all. Radio reception is poor. / Static noise while listening to the radio. “IN” flashes. CD-R/CD-RW cannot be played back and tracks cannot be skipped. Disc sound is sometimes interrupted. “NA FILE” appears. “NO DISC” appears. “TOC ERROR” appears. “ERROR 77” or “ERROR 99” appears. “COPY PRO” appears. “READ ERROR” appears. “NO DEVICE” appears. “NO MUSIC” or “ERROR 15” appears. “NA DEVICE” appears. “USB ERROR” appears. “iPod ERROR” appears. Noise is generated. Tracks cannot play back as you have intended them to play. “READING” keeps flashing. Elapsed playing time is not correct. The number of songs contained in “SONGS” category of this unit is different from that contained in “SONGS” category of iPod. Adjust the volume to the optimum level. / Check the cords and connections. Check to be sure the terminals of the speaker leads are covered with insulating tape properly, then reset the unit. If “PROTECT” does not disappear, consult your nearest service center. Reset the unit. Connect the antenna firmly. / Pull the antenna out all the way. The CD player is not operating properly. Reinsert the disc properly. If the condition did not improve, turn off the unit and consult your nearest service center. Insert a finalized CD-R/CD-RW (finalize with the component which you used for recording). Stop playback while driving on rough roads. / Change the disc. / Check the cords and connections. The unit is playing an unsupported audio file. Insert a playable disc into the loading slot. The CD is quite dirty. / The CD is upside-down. / The CD is scratched a lot. Try another disc instead. The unit is malfunctioning for some reason. Press the reset button on the unit. If the “ERROR 77”/ “ERROR 99” code does not disappear, consult your nearest service center. A copy-protected file is played. Copy the files and folders for the USB device again. If the error message is still displayed, initialize the USB device or use other USB devices. ¦ No USB device is connected. Connect a USB device, and change the source to USB again. ¦ SD card is not inserted properly. Insert an SD card, and change the source to SD again. The connected USB device or inserted SD card contains no playable audio file. / Media was played that does not have data recorded that the unit can play. ¦ Connect a supported USB device, and check the connections. ¦ Check that the supported SD card is inserted. Remove the USB device, turn the unit off, then turn it on again. If the unit still showing the same display, try to connect another USB device. Reconnect the iPod. / Confirm that the software for the iPod is the latest version. / Reset the iPod. Skip to another track or change the disc. Playback order is determined when files are recorded. Longer readout time is required. Do not use too many hierarchies and folders. This is caused by how the tracks are recorded. Podcast files are not counted in this unit as this unit does not support the playback of podcast files. 34 English Symptom Remedy/Cause Correct characters are not displayed (e.g. album name). This unit can only display letters (upper case), numbers, and a limited number of symbols. Symptom Remedy/Cause Correct characters are not displayed (e.g. album name). This unit can only display letters (upper case), numbers, and a limited number of symbols. Bluetooth Symptom Remedy/Cause The hands-free talk volume is low. No beep is heard at reception of an incoming call. Voice is not recognized. “NO NUMBER” appears. “NO DATA” appears. “NO ENTRY” appears. “HF DISCONCT” appears. “HF ERROR 07” appears. “HF ERROR 68” appears. “UNKNOWN” appears. “DEVICE FULL” appears. “PIN CODE NG” appears. “CONNECT NG” appears. “PAIRING NG” appears. “NO MARCHING” appears. “TOO SOFT” appears. “TOO LOUD” appears. “TOO LONG” appears. “NO PHONEBOOK” appears. “NO MESSAGE” appears. “NO RECORD” appears. “MEMORY FULL” appears. “NO VOICE” appears. The sound from the Bluetooth audio player is discontinuous. The hands-free talk volume can be adjusted independently. Adjust it during hands-free talk. [MIC GAIN], [NR LEVEL] and [EC LEVEL] of (page 25). No beep is heard depending on the type of your cell-phone. The [CALL BEEP] of (page 25) is set ON. ¦ The vehicle window is open. If the surrounding noise is large, voice cannot be recognized properly. Close the vehicle windows to reduce noise. ¦ Small voice. If voice is too small, it cannot be recognized properly. Speak into the microphone a little more loudly and naturally. ¦ The person uttering the voice tag...


Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie