• Use a disc changer supported by the system (see page 4). • Press the reset button on the unit (see page 4). • Make proper connections according to (see page 78). • For safety reasons no television/video images are displayed while the vehicle is moving. Engaging the parking brake will cause images to be displayed. • If the temperature of the monitor unit drops, the screen may appear darker when power is first turned on due to the characteristics of a liquid crystal panel. Wait a while after turning power on for the temperature to rise. Normal brightness will return. • When the unit is set to auto dimmer, it is not linked to the vehicle's light switch. • Make proper connections according to (see page 78). • Separate the two antennas as far as possible. • Turn off the main unit. • Switch the remote control mode selector according to the source you select (see page 12). No sound can be heard, or the volume is low. No sound can be heard, or the volume is low. • Attenuator is turned on. • Turn off Attenuator. • The fader or balance settings are set all the way to • Reset the fader and/or balance settings. one side. • The input/output wires or wiring harness are • Reconnect the input/output wires or the wiring harness connected incorrectly. correctly. See the section on (see page 78). The sound quality is poor or distorted. • One of the speaker wires is being pinched by a screw in the car. • The speakers are not wired correctly. • The car antenna is not extended. • The antenna control wire is not connected. Radio reception is poor. • Check the speaker wiring. • Reconnect the speaker wires so that each output terminal is connected to a different speaker. • Pull the antenna out all the way. • Connect the wire correctly, referring to the section on (see page 78). The memory is erased when the ignition is turned off. • The battery wire has not been connected to the • Connect the wire correctly, referring to the section on proper terminal. (see page 78). • The ignition and battery wire are incorrectly • Connect the wire correctly, referring to the section on connected. (see page 78). The TEL mute function does not work. • The TEL mute wire is not connected properly. • Connect the wire correctly, referring to the section on (see page 78). The TEL mute function turns on even though the TEL mute wire is not connected. • Pull the TEL mute wire away from the metal part of the • The TEL mute wire is touching a metal part of the car. car. The sound/picture skips on a DVD/VCD/CD. • Clean the disc, referring to the section on (see page 6). • The disc is scratched or dirty. A track will not play. • Random play has been selected. • Turn off random play. A VCD cannot be played using menus. • The VCD disc being played is not compatible with • Menu playback is available only with VCD discs recorded with P.B.C. P.B.C. The subtitle is not displayed. • The DVD disc being played does not contain the • The subtitle cannot be displayed when the DVD disc being recording of subtitles. played does not contain the recording of subtitles. The voice (or subtitle) language cannot be changed. • The DVD disc being played does not contain the • The voice (or subtitle) language cannot be changed when recording of more than one audio (or subtitle) the DVD disc being played does not contain the recording language. of more than one voice (or subtitle) language. English 89 90 English Troubleshooting Guide The viewing angle cannot be changed. • The DVD disc being played does not contain the recording of more than one angle. • You are attempting to switch the angle in a DVD section where more than one angle is not recorded. Playback will not start even after a title is selected. • A viewing restriction (RATING) has been set for the disc. The voice or subtitle language selected in the initial setting is not played. • The DVD disc being played does not contain the recording of the selected voice or subtitle language. .. Disc source The disc control mode cannot be selected. • No wire has been connected to the disc changer input terminal on the unit. The specified disc does not play, but another one plays instead. • The specified CD is quite dirty. • The CD is upside-down. • The disc is loaded in a different slot from that specified. • The disc is severely scratched. The sound skips. • Something is touching the disc changer. • The CD is scratched or dirty. The display shows that the changer is being played, but no sound can be heard. • The computer chip in the unit is not functioning normally. The specified track will not play. • Random play or magazine random play has been selected. Track repeat, disc repeat, track scan, disc scan, random play, and magazine random play start by themselves. • The setting is not cancelled. Can’t remove disc. • The cause is that more than 10 minutes has elapsed since the vehicle ACC switch was turned OFF. • The viewing a...
)
