valutazioni - 0, GPA: 0
(
)
)
|
Foto e specifiche Philips CEM2101/12 |
Facilità d'uso
2 Press SOURCE repeatedly until [MP3 LINK] is displayed. 3 Operate the external component (refer to the instructions supplied with the external component). English EN 16 6 Adjust sound Adjust volume Turn clockwise/counterclockwise to increase/ decrease volume. Mute You can turn off the sound of your audio. During play, press . • To resume sound, press again. Turn Dynamic Bass Boost (DBB) on/off 1 Press DBB and the current setting is displayed: » [DBB ON]: Dynamic Bass Boost (DBB) function is on. » [DBB OFF]: Dynamic Bass Boot (DBB) function is off. 2 Press DBB again to change the DBB setting. Turn MAX sound on/off 1 Press ............. » The current setting displays • [MAX ON]: maximum sound (MAX sound) function is on. • [MAX OFF]: maximum sound (MAX sound) function is off. 2 Press ............ again to select an option. Select preset equalizer 1 Press EQ / AUDIO. » Current Equalizer setting is displayed. 2 Press EQ / AUDIO again to select a preset EQ setting: • [OPTIMAL] (optimal) • [FLAT] (flat) • [POP] (pop) • [USER] (user) • [TECHNO] (techno) • [ROCK] (rock) • [CLASSIC] (classic) • [JAZZ] (jazz) Switch music listening zone Philips’ innovative Zone technology enables driver or passengers to enjoy music with the best speakers balance and experience more vivid spacial effect as the ar tist is intended to create.You can switch the music listening zone from driver to passengers for the best speaker sound settings in car. 1 Press ZONE. » The current setting is displayed. 2 Rotate / to select a setting: • [ALL] • [FRONT-L] (Front left) • [FRONT-R] (Front right) • [FRONT] 17 EN Other sound settings You can also adjust the preset EQ / AUDIO settings. 1 Press EQ / AUDIO for 3 seconds. 2 Press or repeatedly to select the item to be adjusted: • [BAS] (bass) range: -7 to +7. • [TRE] (treble) range: -7 to +7. • [BAL] (balance) range: 12L to 12R. (L=left speaker, R=right speaker) • [FAD] (fader) range: 12R to 12F. (R=rear speaker, F=front speaker) 3 Rotate to select a value. English EN 18 19 EN 7 Adjust system settings Turn beep sound on/off Each time you press a button, the unit beeps. You can turn this beep sound on or off. 1 Press MENU. 2 Press or repeatedly until [BEEP] is displayed. 3 Rotate to select a setting: • [BEEP ON]: turn the beep sound on. • [BEEP OFF]: turn the beep sound off. Turn demo mode on/off 1 Press MENU. 2 Press or repeatedly until [DEMO] is displayed. »»The screen shows current demo mode setting. 3 Rotate to select a setting: • [DEMO ON]: turn the demo mode on. When the unit is idle for more than 120 seconds, all functions are displayed. • [DEMO OFF]: turn the demo mode off. Dimmer 1 Press MENU. 2 Press or repeatedly until [DIMMER] is displayed. 3 Rotate to select a setting: • [DIMM HIGH] (dimmer high) • [DIMM LOW] (dimmer low) Dance You can turn on or off the spectrum on the LCD display. 1 Press MENU. 2 Press or repeatedly until [DANCE] is displayed. 3 Rotate to select a setting: • [DANCE ON]: turn the spectrum on. • [DANCE OFF]: turn the spectrum off. Reset You can reset the unit to its default setting. 1 Detach the front panel. 2 Press the reset button by using a ball-point pen or a similar tool. »» Preset adjustments such as preset channels and sound adjustments are erased. 20 English EN 8 Additional information Detach the front panel You can detach the front panel to deter theft. 1 Press to release the panel. 2 Pull the panel towards you to disengage it from the classis. 3 Store the panel in the supplied carrying case to protect it from dirt or damage. Replace fuse If the fuse is damaged, 1 Check the electric connection. 2 Buy a fuse that matches the voltage of the damaged fuse. 3 Replace the fuse. Note •• If the new fuse gets damaged again, there may be an internal malfunction. Consult your Philips dealer. Remove the unit You can remove the unit from the dashboard. 1 Detach the front panel. 2 Pull out the unit by using the disassembly tools. 9 Product information Note • Product information is subject to change without prior notice. Power supply 12 V DC (11 V - 16 V), Fuse 15 A negative ground Suitable speaker impedance 4 - 8 Maximum power output 40 W x 4 channels Continuous power 21 W x 4 RMS (4 output 10% T.H.D.) Pre-Amp output voltage 2.5V Aux-in level 500 mV Dimensions (W x H x D) 181.5 x 52 x 191.4 mm Weight 1.47 kg Radio Frequency range - FM 87.5 - 108.0 MHz Frequency range - 522 - 1620 KHz (9 kHz) AM(MW) 530 - 1710 kHz (10 kHz) Usable sensitivity - FM 8 .V Usable sensitivity - AM(MW) 30 .V Compatible USB devices: • USB flash memor y: USB 1.1 host with interface reading all speed suppor t (1.1, 2.0) • USB flash players: USB 1.1 host with interface reading all speed suppor t (1.1, 2.0) Supported formats: • USB or memor y file format: FAT12, FAT16, FAT32 • MP3 bit rate (data rate): 32-320 Kbps and variable bit rate • WMA V4, V7, V8, V9 (L1, L2) • MP3 sampling frequencies: 8-48 kHz • MP3 Bit-rates: 8~320 (kbps), variable bit rates • WMA sampling frequencies: 32 kHz, 44.1 kHz, 48 kHz • W...