valutazioni - 0, GPA: 0
(
)
)
|
Foto e specifiche Philips CEM2250/51 |
Facilità d'uso
• If the car battery is not disconnected, to avoid short-circuit, make sure that the bare wires do not touch each other. 1 Ensure that car dashboard opening is within these measurements: 183 mm53mm5mm EN 2 Remove the mounting sleeve with the supplied disassembly tools. 3 Install the sleeve into the dashboard and bend the tabs outward to fix the sleeve. 183 mm53.5 mm 4 Place the supplied rubber cushion over the end of the mounting bolt. 5 Slide the unit into the dashboard until you hear a click sound. 6 Attach the trim plate. 7 Reconnect the negative terminal of the car battery. Attach the front panel 1 Insert the notch on the front panel to the chassis on the main unit. English EN 2 Press the left end of the front panel inwards until it is securely locked with a "click". Detach the front panel Note ••Before you detach the front panel, make sure that the system is turned off. 1 Press to release the front panel. 2 Pull the front panel outwards to remove it. 4 Get started For the first time use Note ••Select correct country/region for this unit, otherwise the unit can not work properly. 1 Press to turn the unit on. »»[SELECT OPERATING REGION] is displayed. 2 Rotate to select an option: • [USA] (United States) • [LATIN] (Latin America) • [EUROPE] (Western Europe) • [RUSSIA] (Russia) • [MID--EAST] (Middle East) • [ASIA] (Pacific) • [JAPAN] (Japan) • [AUSTRALIA] (Australia) • [OIRT] (OIRT) 3 Press to confirm. Set the time format 1 Press MENU. 2 Press or repeatedly until [CLOCK FORMAT] is displayed. 3 Rotate to select a setting: • [CLK 12H] • [CLK 24H] Set the clock 1 Press MENU repeatedly until [CLOCK SET] is displayed. EN 2 Rotate to set hour. 3 Press to confirm. 4 Rotate to set minute. 5 Press to confirm. Display the clock In any mode, press and hold ............ / until the clock is displayed. • Press any key to cancel the clock display. Select a source Press SOURCE repeatedly to select a source. • [RADIO]: Listen to FM/AM radio. • [MP3--LINK]: Listen to the audio input through the MP3-LINK socket. • [iPod/USB]: When a USB storage device or compatible iPod/iPhone is connected and recognized, you can select this source to play audio files that are stored on it. Switch music listening zone Philips’ innovative Zone technology enables driver or passengers to enjoy music with the best speakers balance and experience more vivid spacial effect as the artist is intended to create. You can switch the music listening zone from driver to passengers for the best speaker sound settings in car. 1 Press and hold ZONE. »»The current setting is displayed. 2 Rotate / to select a setting: • [ALL] (All) • [LEFT] (Left) • [RIGHT] (Right) • [FRONT] (Front) Mute the button beep The beep sound of the buttons is enabled by default. You can turn this beep sound on or off. 1 Press MENU. 2 Press or repeatedly until [BEEP TONE] is displayed. 3 Rotate to select a setting: • [BEEP ON]: turn the beep sound on. • [BEEP OFF]: turn the beep sound off. English EN 5 Listen to radio Select a tuner region You can select suitable country/region of the radio. 1 Press SOURCE to select radio mode. 2 Press MENU repeatedly until [AREA] is displayed. 3 Rotate to select: • [USA] (United States) • [LATIN] (Latin America) • [EUROPE] (Western Europe) • [RUSSIA] (Russia) • [MID--EAST] (Middle East) • [ASIA] (Asia Pacific) • [JAPAN] (Japan) • [AUSTRALIA] (Australia) • [OIRT] (OIRT) 4 Press to confirm. Select tuner sensitivity To receive more radio stations or only stations with strong signal, you can adjust the tuner sensitivity. 1 Press MENU repeatedly until [LOCAL] is displayed. 2 Rotate to select a setting: • [LOCAL ON] (local on): only stations with strong signal can be broadcast. • [LOCAL OFF] (local off): stations with strong and weak signals can be broadcast. Select radio band 1 Press SOURCE repeatedly to select radio mode. 2 Press BAND or / repeatedly to select band: [FM1], [FM2], [FM3], [AM1], or [AM1]. Search for a radio station Search for a radio station automatically Press or to search for the previous or next radio station with strong signals. »»[SEEK--] or [SEEK+] is displayed until the previous or next strong station is detected. Search for a radio station manually 1 Press and hold or until the frequency digit flashes. 2 Press or repeatedly until the target frequency is displayed. Store radio stations in memory You can store up to 6 stations in each band. Store stations automatically 1 In radio mode, press and hold DBB/AS until [STORE - - -] is displayed. 2 Press to confirm. »»The six strongest stations of the selected band are saved in preset channel automatically. • To select a stored radio station, press the numeric button directly. EN Store stations manually 1 Press / repeatedly to select a tuner band. 2 Tune to a radio station that you want to store. 3 Press a numeric button for 3 seconds. »»The station is saved in the selected channel. • To select a stored radio station, press the numeric button directly. Play with RDS The RDS (Radio Data S...