valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
We will keep the details of your purchase on file to help you refer to this information in the event of an insurance claim such as loss or theft. Resetting the microprocessor The microprocessor must be reset under the following conditions: When using this product for the first time after installation. When the machine fails to operate properly. When strange (incorrect) messages appear on the display. • To reset the microprocessor, press the RESET button on the head unit with a pen tip or other pointed instrument. 11 Detaching and Replacing the Front Panel Theft protection The front panel of the head unit is detachable to discourage theft. Precaution: • Never use force or grip the display tightly when removing or replacing the front panel. • Avoid subjecting the front panel to excessive shocks. • Keep the front panel out of direct sunlight and high temperatures. Detaching the front panel 1. Open the front panel. Precaution: • A few seconds after turning the ignition switch to ON/OFF, the front panel automatically moves. When this happens, your fingers may become jammed in the panel, so keep your hands away from it. 2. Slide and remove the front panel toward you. Take care not to grip the front panel tightly or drop it. Release Section Note: • When removing the front panel, be sure to hold the corrugated release section on the rear of the front panel while pulling. 3. Use the protective case provided to store/carry the detached front panel. 12 Replacing the front panel 1. Make sure the inner cover is closed. 2. Replace the front panel by clipping it into place. Warning tone If the front panel is not detached within 5 seconds after the ignition is turned off, a warning tone will sound. Note: • You can cancel the warning tone function. (Refer to page 20.) Detaching 13 Setting Up the Environment for Use Setting up the environment for use Choose the way to use the head unit, including adjustment of clock and selection of wallpaper. Some functions are not available unless their setting is selected. Set up the environment to suit the system to be used. Operation at the initial setting screen Accessing the initial setting screen 1. Open the cover of the remote control. 2. Press the SHIFT button. This switches to initial setting screen. 3. Select the function by pressing the FUNCTION buttons 1 to 4. 7 Initial setting screen Setting the clock (See page 16.) Setting the display (See page 18.) Setting the menu lock (See page 23.) Setting the general environment (See page 20.) 14 Exit from the initial setting screen • Close the cover of the remote control. Setting 15 Setting Up the Environment for Use Setting the clock Switching to the clock adjustment screen • Press the FUNCTION button 1 on initial setting screen. This switches to clock adjustment screen and enables clock setting. Setting the clock 1. Press the 2/3 buttons and move the cursor to the section (hour, minute) to be adjusted. 2. Press the 5/. buttons to set the clock. Holding these buttons down extends the operations continuously. Note: • Seconds are not displayed. However, when releasing the buttons after setting the time, the clock starts from zero second. 16 Setting the clock by time signal • Press the FUNCTION button 2 on clock adjustment screen to reset the minute display. As the clock starts from zero seconds when pressing the button, the clock can be set using the time signal (radio, telephone, etc). Note: • minutes, it is rounded up to the next hour. Off clock When the sources are OFF, the time appears on the display. • Press the FUNCTION button 1 on clock adjustment screen switches the clock display ON/OFF. Note: • When the display shows the operation screen of each source, the clock time is always displayed on the screen. Returns to the initial setting screen • Press the RETURN button. The display returns to initial setting screen. From 00 to 29 minutes, the hour remains the same, making the minute display “00”. From 30 to 59 The minute display is reset to 00. Setting 17 Setting Up the Environment for Use Setting the display Switching to the display setting screen • Press the FUNCTION button 2 on initial setting screen. This switches to display setting screen and enables display setting. Setting the brightness If it is hard to read the display, you can adjust the brightness for better legibility. • Press the 2/3 buttons on display setting screen adjusts the brightness. The display shows “0” to “30”. Setting the dimmer To enable this product’s display from being too bright at night, when the vehicle’s head lights are turned ON the display is dimmed. You can switch this function ON/OFF. • Press the FUNCTION button 1 on display setting screen switches the dimmer ON/OFF. 18 Selecting the wallpaper This product is equipped with three types of wallpaper. • Press the FUNCTION button 2 on display setting screen switches the wallpaper. Selecting the reverse mode ON. • Press the FUNCTION button 3 on display setting screen switches the reverse mode ON/OFF. Re...