valutazioni - 0, GPA: 0
(
)
)
|
Facilità d'uso
3 SOURCE/POWER button Switches between sources and switches power ON/OFF. 4 WIDE button Changes the method of enlarging 4:3 video to 16:9 video. 5 Volume control (–/+) buttons Adjust the volume of the built-in speaker 0. Note: • Never set the volume so high that you cannot hear outside traffic and emergency vehicles. 6 NAVI/AV button Switches the display to the desired indications. Use to switch between navigation images and the images of each source. 7 NAVI button You press this button to view Navigation Map or return to guidance. Also, when the map is scrolled, pressing this button returns to the display of the map of your surroundings. 8 NAVI MENU button Pressing this button displays Navigation Menu. 9 MENU-ENTER button (5/./2/3 buttons) Use to switch to operate the setup menu for various settings. 0 Built-in speaker Outputs sound from audio equipment connected to this product. ! Lock release lever (Refer to page 4.) 8 Turn On Power Remember to start the car engine before turning on the power to preserve battery life. 1. Start the car engine. LOCK Basic Operation LOCK Basic Operation 2. Turn on the system. Press the SOURCE/POWER button. To turn off the system, press the SOURCE/POWER button and hold for 2 seconds. Volume Adjustment Adjust the volume of audio output from the built-in speaker. • Raise or lower the speaker volume. VOL 12 AV I N 1+GUIDE The volume of the built-in speaker can be adjusted in a range of 0 to 30. (The volume level will be displayed for about 4 seconds.) 9 Selecting a Source When the Pioneer Navigation unit is combined, you can select the images of each source. • Select the desired source. AV IN1 ENGLISH Each press of the SOURCE/POWER button selects the desired source in the following order: [AV IN1] = [AV IN2] = [NAVI SOURCE] = Exit to [AV IN1] Note: • [NAVI SOURCE] indicates the Pioneer Navigation unit with DVD-Video playback connected to the hide-away unit’s 26-pin input. (The source does not switch to [NAVI SOURCE] when the Pioneer Navigation unit without DVD-Video playback or nothing is connected to the 26-pin input.) • [AV IN1] and [AV IN2] are audio and video from the AV equipment connected to the AV IN1 or AV IN2 input terminal. (Refer to page 26.) • Verify the correct connection with the AV equipment connected to AV IN1 or AV IN2. • AV IN2 is selectable only if either [ON] or [BACK-UP CAM] has been chosen in [VIDEO SETTING] . (Refer to page 16.) • Pressing the NAVI/AV button will switch between navigation images (Navigation Map) or the images of each source. • When showing navigation images (Navigation Map), only the built-in speaker audio can be switched with the SOURCE/POWER button. 10 Basic Operation Changing the Wide Screen Mode You can change the way in which normal video (aspect ratio 4:3) enlarges to wide video (16:9). Select wide modes to suit the kind of video you are viewing. 1. Display a source to view. (Refer to the previous page.) 2. Select a wide mode. JUST Each press of the WIDE button selects the wide mode in the following order: [FULL] = [JUST] = [CINEMA] = [ZOOM] = [NORMAL] = Exit to [FULL] Note: • Settings are stored for each source (NAVI SOURCE, AV IN1, AV IN2). • When video is viewed in a wide mode that does not match its original aspect ratio, it may appear differently. • Remember that using the wide mode feature of this system for commercial or public viewing purposes may constitute an infringement on the author’s rights protected by the Copyright Law. 11 Wide Modes Available FULL Video with an aspect ratio of 4:3 enlarges only horizontally. Enjoy viewing video widened without missing parts. JUST Video appears more extended horizontally as it gets closer to both edges of the screen. Because video appears in about the same size as regular video around the middle of the screen, enjoy viewing it without feeling out of place. CINEMA Video enlarges vertically with a aspect ratio falling between FULL and ZOOM. This wide mode is suited for horizontally long video, such as movies, in which titles are displayed in black areas outside the video. ZOOM Video with an aspect ratio of 4:3 enlarges with the same aspect ratio in both vertical and horizontal directions. This wide mode is suited for horizontally long video, such as movies, in which titles overlap the video. NORMAL Video with an aspect ratio of 4:3 appears without enlarging. Enjoy viewing TV in the same video as it is broadcast. ENGLISH Note: • Video will appear roughened when viewed in CINEMA or ZOOM mode. 12 Operating the Setup Menu Entering the Setup Menu This system offers a number of functionality setup and adjustment features to make it easier to use. Customize the settings to suit your taste and environment. 1. Display the setup menu. Press the MENU-ENTER button. MENU P I CTURE ADJUST VIDEO SETTING AUD I O SETTING RETURN 2. Select a setting. MENU P I CTURE ADJUST VIDEO SETTING AUD I O SETTING RETURN Press 5 or . to select a desired item, and press the MENU-ENTER button. For details, refer to the...