Log:
valutazioni - 2, GPA: 4.5 ( )

Istruzioni per l'uso Sony, Modello CDX-C5000RV

Produttore : Sony
File Size : 1.65 mb
File Nome :
Lingua di insegnamento: rusvenespt
Foto e specifiche   Sony  CDX-C5000RV
Vai a scaricare



da questo dispositivo ha anche altre istruzioni :
Unità - CDX-C5000RV (254.22 kb)

Facilità d'uso


(See "Changing the sound and display settings" on page 24.) Note "NO NAME" appears if the received station does not transmit RDS data. Retuning the same programme automatically — Alternative Frequencies (AF) The Alternative Frequencies (AF) function automatically selects and retunes the station with the strongest signal in a network. By using this function, you can continuously listen to the same programme during a longdistance drive without having to retune the station manually. 1 Select an FM station (page 16). 2 Press (af) repeatedly until "AF-ON" appears. The unit starts searching for an alternative station with a stronger signal in the same network. Note The "* " indication means that an RDS station is being received. Changing the displayed item Each time you press (dspl/pty) , the item changes as follows: Station Name (Frequency) PTY data After you select the desired item, the display will automatically change to the Motion Display mode after a few seconds. In the Motion Display mode, all the items are scrolled in the display one by one in order. 17 Notes • When there is no alternative station in the area and you do not need to search for an alternative station, turn the AF function off by pressing (af) repeatedly until "AF-OFF" appears. • When "NO AF" and the station name flash alternately, it means that the unit cannot find an alternative station in the network. • If the station name starts flashing after selecting a station with the AF function on, this indicates that no alternative frequency is available. Press either side of (seek/ams) while the station name is flashing (within eight seconds). The unit starts searching for another frequency with the same PI (Programme Identification) data ("PI SEEK" appears and no sound is heard). If the unit cannot find another frequency, "NO PI" appears, and the unit returns to the previously selected frequency. Local link function (United Kingdom only) The Local Link function lets you select other local stations in the area, even if they are not stored on your number buttons. 1 Press a number button that has a local station stored on it. 2 Within five seconds, press the number button of the local station again. 3 Repeat this procedure until the desired local station is received. Listening to a regional programme The “REG-ON” (regional on) function lets you stay tuned to a regional programme without being switched to another regional station. (Note that you must turn the AF function on.) The unit is factory preset to “REG-ON,” but if you want to turn off the function, do the following. 1 During radio reception, press (menu), then press either side of (disc/prst) repeatedly until "REG" appears. 2 Press the (+) side of (seek/ams) until "REG-OFF" appears. 3 Press (enter). Note that selecting “REG-OFF” might cause the unit to switch to another regional station within the same network. To return to regional on, select “REG-ON” in step 2. Note This function does not work in the United Kingdom and in some other areas. Listening to traffic announcements The Traffic Announcement (TA) and Traffic Programme (TP) data lets you automatically tune in an FM station that is broadcasting traffic announcements even if you are listening to other programme sources. Press (TA) repeatedly until "TA-ON" appears. The unit starts searching for traffic information stations. “TP” appears in the display when the unit finds a station broadcasting traffic announcements. When the traffic announcement starts, “TA” flashes. The flashing stops when the traffic announcement is over. T>p If the traffic announcement starts while you are listening to another programme source, the unit automatically switches to the announcement and goes back to the original source when the announcement is over. 18 Notes • "NO TP" flashes for five seconds if the received station does not broadcast traffic announcements. Then, the unit starts searching for a station that broadcasts it. • When "EON" appears with "TP" in the display, the current station makes use of broadcast traffic announcement of other stations in the same network. To cancel the current traffic announcement Press (TA), (source) or (mode). To cancel all traffic announcements, turn off the function by pressing (TA) until “TA-OFF” appears. Presetting the volume of traffic announcements You can preset the volume level of the traffic announcements beforehand so you won't miss the announcement. When a traffic announcement starts, the volume will be automatically adjusted to the preset level. Presetting the RDS stations with the AF and TA data When you preset RDS stations, the unit stores each station's data as well as its frequency, so you don't have to turn on the AF or TA function every time you tune in the preset station. You can select a different setting (AF, TA, or both) for individual preset stations, or the same setting for all preset stations. Presetting the same setting for all preset statio...

Questo manuale è adatto anche per i modelli :
Unità - CDX-C4900R (1.65 mb)
Unità - CDX-C5000R (1.65 mb)
Unità - CDX-C5000RX (1.65 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie