valutazioni - 3, GPA: 4.7
(
)
)
|
Facilità d'uso
“ATT" is displayed at the lowest setting, and can be adjusted up to 20 steps. 2 Press the volume +/- button repeatedly to adjust the selected item. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. Note Adjust within 3 seconds of selecting the item. With the card remote commander In step 2, to adjust the selected item, press <, M, ,, or m. Adjusting the equalizer curve — EQ3 You can adjust and store the equalizer settings for different tone ranges. 1 Select a source, then press (EQ3) repeatedly to select the EQ3 type. 2 Press (sel) repeatedly until “LOW,” “MID” or “HI” appears. 3 Press the volume +/- button repeatedly to adjust the selected item. The volume level is adjustable in 1 dB steps, from -10 dB to +10 dB. LQu + Ed3 Repeat steps 2 and 3 to adjust the equalizer curve. To restore the factory-set equalizer curve, press and hold (SEL) before the setting is complete. After 3 seconds, the setting is complete and the display returns to normal play/reception mode. 1 Press and hold (sel). The setup display appears. 2 Press (sel) repeatedly until the desired item appears. 3 Press the volume +/- button to select the setting (example “ON” or “OFF”). 4 Press and hold (sel). The setup is complete and, the display returns to normal play/reception mode. Note Displayed items will differ, depending on the source and setting. With the card remote commander In step 3, to select the setting, press < or ,. The following items can be set (follow the page reference for details): “•” indicates the default settings. CLOCK-ADJ (Clock Adjust) (page 4) BEEP To set “BEEP-ON” (•) or “BEEP-OFF.” SUB/REAR*1 To switch the audio output. -“SUB” (•): to output to a subwoofer. - “REAR”: to output to a power amplifier. DIM (Dimmer) To change the brightness of the display. -“DlM-ON”: to dim the display. -“DIM-OFF” (•): to deactivate the dimmer. DEMO*1 To set “DEMO-ON” (•) or (Demonstration) “DEMO-OFF” (page 4). A.SCRL To scroll long displayed items (Auto Scroll) automatically when the group/ track is changed. -“A.SCRL-ON”: to scroll. -“A.SCRL-OFF” (•): to not scroll. continue to next page t 7 LPF*2 (Low To select the cut-off frequency Pass Filter) “78HZ,” “125HZ” or “OFF” _(•)_ *1 When the unit is turned off. *2 When the audio output is set to “SUB.” Using optional remote commander Card remote commander RM-X114 Location of controls The corresponding buttons on the card remote commander control the same functions as those on this unit. The following buttons on the card remote commander have also different buttons/functions from the unit. • SOUND button The same as (SEL) on the unit. • Questo manuale è adatto anche per i modelli :
Unità - CDX-S2250EE (710.67 kb)