valutazioni - 2, GPA: 3
(
)
)
|
Foto e specifiche Pioneer DEH-50UB |
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
300 mA, 12 V DC). If the vehicle is eguipped with a glass antenna, connect it to the antenna booster power supply terminal. • Never connect blue/white cable to external power amp’s power terminal. Also, never connect it to the power terminal of the auto antenna. Otherwise, battery drain or malfunction may result. • Black cable is ground. This cable and other product’s ground cable (especially, high-current products such as power amp) must be wired separately. Otherwise, fire or malfunction may result if they are accidentally detached. (Connecting the units ~) (( English Connection Diagram 1. USB Input (DEH-5000UB) Connect to separately sold USB device. 2. Rear output or subwoofer output 3. Antenna jack 4. Fuse (10 A) 5. USB input (DEH-50UB) 6. Wired remote input Hard-wired remote control adaptor can be connected (sold separately). 7. AUX jack (3.5 0) Use a stereo mini plug cable to connect with auxiliary device. 8. This product 9. USB cable (DEH-50UB) Connect to separately sold USB device. 10.Note Depending on the kind of vehicle, the function of 3* and 5* may be different. In this case, be sure to connect 2* to 5* and 4* to 3*. 11 .Connect leads of the same color to each other. 12.Cap (1*) Do not remove cap If this terminal Is not in use. 13.Yellow (3*) Back-up (or accessory) 14. Yellow (2*) Connect to the constant 12 V supply terminal. 15.Red (5*) Accessory (or back-up) 16. Red (4*) Connect to terminal controlled by Ignition switch (12 V DC). 17.Black (chassis ground) Connect to a clean, paint-free metal location. 18.ISO connector Note In some vehicles, the ISO connector may be divided into two. In this case, be sure to connect to both connectors. 19. Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections. 20.Blue/white Connect to system control terminal of the power amp (max. 300 mA 12 V DC). 21 .Blue/white (7*) Connect to auto-antenna relay control terminal (max. 300 mA 12 V DC). 22.Blue/white (6*) The pm position of the ISO connector will differ depends on the type of vehicle. Connect 6* and 7* when Pin 5 is an antenna control type. In another type of vehicle, never connect 6* and 7*. 23.Speaker leads White: Front left © White/black: Front left © Gray: Front right © Gray/black: Front right © Green: Rear left © or subwoofer © Green/black: Rear left © or subwoofer © Violet: Rear right © or subwoofer © Violet/black: Rear right © or subwoofer © 24.To rear output or subwoofer output 25.Connect with RCA cables (sold separately) 26. Power amp (sold separately) 27.System remote control 28. Left 29.Right 30.Rear speaker or subwoofer 31 .Perform these connections when using the optional amplifier. 32. Notes • Change the Initial setting of this unit (refer to the operation manual). The subwoofer output of this unit is monaural. • When using a subwoofer of 70 W (2 Q), be sure to c...
Questo manuale è adatto anche per i modelli :Unità - DEH-4000UB (1.13 mb)
Unità - DEH-5000UB (1.13 mb)