valutazioni - 2, GPA: 5
(
)
)
|
Foto e specifiche Hyundai H-CDM8022 |
Facilità d'uso
Each of the following modes is adjustable by rotating the VOL/SEL knob. TA seek mode: choose TA ALARM or TA SEEK mode. • TA ALARM mode: alarm is turned on. • TA SEEK mode: TA SEEK is automatically activated. MASK mode: choose Mask DPI or Mask ALL. • MASK DPI mode: Only AF which have different program identification is masked. • MASK ALL mode: The AF which has different program identification and NO RDS signal with high field strength is masked. TA VOL mode: adjust the value within 0 - 46. RETUNE mode: select Retune L or Retune S. • RETUNE L mode: long; TA seek interval is 180 seconds. • RETUNE S mode: short; TA seek interval is 45 seconds. Note: Retune mode is active for TA SEEK mode only. DSP mode: choose DSP sound effect: ROCK, POP, CLASSIC, FLAT, DSP OFF. LOUD mode: switch the loud to ON or OFF. 12/24 hours mode: choose the 12 or 24 hours mode. VOL LAST: switch to VOL ADJ. • VOL LAST mode: the turn-on volume level is that of latest power-off. • VOL ADJ mode: volume level is adjustable. V-ADJ mode: adjust within 0 - 46. BEEP mode: switch the beep sound to ON or OFF. CONNT mode: choose CONNT A or CONNT M. 12 • CONNT A mode: bluetooth is connected automatically. • CONNT M mode: bluetooth is connected manually. Turning the sound off Short press the PWR button to turn the sound off. Press it again or use the VOLUME buttons to turn the sound on. Adjusting clock Press and hold DISP button for more than 2 seconds to select the hour setting. Rotate the VOL/SEL knob clockwise to set the hours; rotate the VOL/SEL knob counterclockwise to set the minutes. Press DISP again to exit the clock setting. 13 Digital tuner_ Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band selection Press PWR to turn the power on, then press the MODE button once or more to select TUNER. Press BAND button once or more to select: FM1, FM2, FM (OIRT), AM1, AM2. Manual/automatic tuning • Automatic tuning: press the «/►► buttons on the panel or m / ►» buttons on the RC repeatedly to automatically select a station downward or upward, the radio automatically tunes to a station of sufficient reception. It will play when finds the station. • Manual tuning: Press and hold the ii / ►► buttons on the panel or K^/^M buttons on the RC buttons, the manual search will be available. Programming tuner stations You can store up to a total of 30 radio stations in the memory (18 FM [12 FM + 6 FM (OIRT)], 12 AM), manually or automatically. • To store a station: - Select a band (if needed) - Select a station by ii / ►► buttons on the panel or K^/^W buttons on the RC buttons. - Hold a Preset button (1-6) under which you want store the station for at least 2 seconds. • To recall a station: - Select a band (if needed) - Press a Preset button (1-6) briefly to recall the stored station During radio mode press the ii / ►► buttons on the panel or K^/^W buttons on the RC buttons to select upward or 14 downward stored stations. AF function (Alternative Frequencies) Press AF button to turn on or turn off the AF function. The RDS program will be automatically searched and received. After turning on, if the RDS signal is week or even no signal, the unit will search another frequency with this RDS program. Note: AF indicator on LCD will flash until RDS information is received. If RDS service is not available in your area, turn off the AF mode. Press and hold AF button for more then 2 seconds, the unit will be under REGION ON or REGION OFF mode: • REG ON: AF function will implement the regional code (of the PI) and only stations in the current region can be tuned automatically; • REG OFF: AF function will ignore the regional code (of the PI) and stations in the other regions can also be tuned automatically. TA (Traffic Announcements) function Press the TA button, LCD shows “TA”, traffic program will be automatically searched and saved, LCD shows TP, the program is received. Note: This function is also valid during playback mode. When traffic announcement is received, the TA indicator will display. The unit will temporarily switch to the tuner mode (regardless of the current mode) and begin broadcasting the announcement at TA volume level. After the traffic announcement is over, it will return to the previous mode and volume level. EON (Enhanced Other Networks) When EON data is received, the EON indicator lights and the TA and AF functions are enhanced. TA: Traffic information can be received from the current station or stations in other network. 15 AF: The frequency list of preset RDS stations is updated by EON data. EON enables the radio to make fuller use of RDS information. It constantly updates the AF list of preset stations, including the one that currently tuned into. If you preset a station around the area at your home, you will later be able to receive the same station at an...