valutazioni - 16, GPA: 3.9
(
)
)
|
Foto e specifiche Hyundai H-CDM8065 |
Facilità d'uso
Press and hold for 2 seconds to start fast backward/ forward playback. 8. CLK button Press it to set the time. 9. MU button Press the button to eliminate or resume the sound immediately. 10. PRESET STATION [1-6] buttons; PLAY/PAUSE/TOP, INT, RPT, RDM buttons In MP3 mode 5 and 6 buttons are assigned as 10 TRACK up/down when normal play. 11. A.P button Press this button to activate Auto-storage function or Preset memory scan function. 12. PWR button Press any button except the VOLUME and OPEN button to turn on the unit, press PWR button to turn off the unit. 13. PTY (Program Type) button Press it to turn the PTY function ON or OFF. 14. TA (Traffic Announcement) button Press it to turn the TA function ON or OFF. 15. AF (Alternative Frequencies) button Press it to turn the AF function ON or OFF. 8 General operations Reset the unit Operating the unit for the first time or after replacing the car battery, you must reset the unit. Press OPEN button and remove the front panel, then press the RESET button on the inner panel to restore the unit to the original factory settings. Power button Press any button (except OPEN button and VOL knob) to turn on the unit. Press POWER button to turn off the unit. Mode setting Press the MOD button to change playing mode in a sequence: RADIO => CD (if there is a disc in unit). Volume control Rotate the VOL knob to adjust volume level. Turning the sound off When the power is on press the MU button to turn the sound off. Press it again or rotate VOL knob to turn the sound on. LOUD mode Press and hold for 2 seconds the TA button to choose LOUD function ON or OFF. When the volume is in half level and the Loud mode is ON, it will enhance the bass sound effect immediately. 9 Setting the clock • To show the time: - In Radio mode when RDS data is received press the CLK button to select the mode: PS NAME => FREQUENCY => PTY => CLOCK. - In Radio mode when RDS data is not received press the CLK button to select the item: FREQUENCY => PTY NONE => CLOCK. - In Disc mode: Press the CLK button shortly to display time for 5 seconds. • To adjust the time: - In Clock mode press the CLK button and hold for 2 seconds. Time will start blinking. - Rotate the VOL knob clockwise to adjust minute. - Rotate the VOL knob anticlockwise to adjust hour. - Press CLK button again to save setting. Setting the sound characteristics Press shortly and repeatedly the SEL button to select the audio setting: VOL => BASS => TREBLE => BALANCE => FADER. Rotate the VOL knob to adjust each setting. c Note: • If turning off the power all the settings of each mode will be saved. • If you don’t adjust VOL knob/VOL+/- buttons within 3 seconds after selecting the desired setting, the unit will automatically return to the current mode being displayed. 10 Setting other characteristics Press and hold for 2 seconds the SEL button to enter the setting mode. Press the SEL button or button to select the setting: EQ => CLK 12H/24H => CT => STEREO => LO/DX => AREA => VOL PGM => BEEP => CLK ON => SEEK RDS => TA SEEK => TA VOL => MASK => REG. Rotate the VOL knob to set the setting. Press SEL to confirm the setting. - EQ mode: rotate the VOL knob to choose the equalizer mode: OFF, FLAT, CLAS, ROCK, POP. - CLK 12H/24H: rotate the VOL knob to choose the time mode: 12H or 24H. - CT mode: rotate the VOL knob clockwise to set minutes, anticlockwise to set hour. - STEREO mode: rotate the VOL knob to choose the mode: Stereo or Mono. - LO/DX mode: rotate the VOL knob to choose tuner sensitivity local or distant. - AREA mode: rotate the VOL knob to choose the area: Europe, Latin, OIRT (option), Austria, Asia, USA. - VOL PGM mode: rotate the VOL knob to adjust volume program value. When turning on the unit, if this value is Less than current volume value, change the current volume value equal to VOL PGM value; otherwise, the current volume value will be remained. - BEEP mode: rotate the VOL knob to choose BEEP ON or OFF mode. - CLK ON mode: rotate the VOL knob to choose CLK ON or OFF mode. When CLK is ON, when the power is off the time will be on display. - SEEK RDS mode: rotate the VOL knob to choose RDS or ALL. If ALL is selected during the Seek RDS tuning mode or AF Search mode, the unit will stop at all radio station including Non RDS station regardless AF and TA is switches on. If RDS is selected and the AF is on during the Seek RDS tuning mode or AF Search mode, the unit will stop at only RDS station. - TA SEEK mode: rotate the VOL knob to choose TA SEEK or TA ALARM. TA seek: when newly tuned station does not receive TP information for 60 seconds, the radio retunes to next station which has not the same station (PI) as the last station, but has the TP information. 11 When TP information gets lost at the current station for retune time which is set by retune time (40 seconds), the radio start to retune to next same PI station. When same PI station does not catch in 1 cyclic searc...