valutazioni - 6, GPA: 3.8
(
)
)
|
Facilità d'uso
Press and hold it, the hour will blink. Rotate VOL knob on the panel to adjust the hour. Press briefly SEL button again, the minute will blink. Rotate VOL knob on the panel to adjust minutes. Press PTY/CLK button to confirm it. 16 Radio operations Note: RDS (Radio Data System) service availability varies with areas. Please understand if RDS service is not available in you area, the following service is not available, either. Band select Press BND/NP/SUB button on the front panel or BND/SYS button on RC repeatedly to select your desired radio band during RADIO mode: FM1, FM2, FM3, AM1, AM2. Scan When SCAN button is pressed, the unit will search for the strongest signal for the nearby station. After the strongest signal is got, the unit stops searching. Auto/ Manual tuning • Manual tuning: Press briefly SEEK-/+ buttons on the RC or press briefly PREVIOUS/NEXT buttons on the panel to select a station downward or upward step by step. • Automatic tuning: Press and hold for 2 seconds SEEK-/+ buttons on the RC press and hold for 2 seconds PREVIOUS/NEXT buttons on the panel, the automatic search will start. It will play when finds the station. Programming tuner stations You can store up to a total of 30 radio stations in the memory (18 FM, 12 AM), manually or automatically. To store a station: • Select a band (if needed) • Select a station by SEEK-/+ on the RC. • Hold a Preset button (1-6) which you want store the station for at least 2 seconds. To recall a station: • Select a band (if needed) • Press a Preset button (1-6) briefly to recall the stored station 17 APS (Auto memory store/ Preset scan) function • Preset scan: press APS button on the panel or AMS button on the RC to scan all preset stations in the memory of the current band and stay on each memory stations for about 5 seconds. To stop preset scan, press this button again. To listen to saved station press 1-6 buttons. • Auto memory store: press APS button on the panel for more than 2 seconds to enter auto store mode. The radio will automatically store the 6 strongest available stations to the 6 preset memories of the current band. To stop auto store, press this button again. Stereo/ Mono mode Press ST/PROG button on the RC to select Stereo or Mono. OR press SEL button until ST is selected, rotate VOL knob to select Stereo or Mono. Local/Distance control Press LOC/RDM button on the RC to select LOC ON or LOC OFF mode. Or press repeatedly SEL button until LOC is selected, rotate the VOL knob to select LOC ON or LOC OFF mode. Local and distance reception setting can facilitate the radio reception, depending on the location in which the radio is being used. AF (Alternative Frequencies) function Press the AF button on the panel to select AF ON or AF OFF. When the radio signal strength is poor, enabling the AF function will allow the unit to automatically search another station with the same PI (Program Identification) as the current station but with stronger signal strength. PS (Program Service name): the name of station will be display instead of frequency. If RDS service is not available in your area, turn off the AF mode. Default setting is ON. TA (Traffic Alarm) function Press the TA button on the panel to select TA ON or TA OFF. In TA mode traffic program will be automatically searched, until the program is received. When traffic announcement is received the unit will temporarily switch to the tuner mode (regardless of the current mode) and begin broadcasting the announcement. After the traffic announcement is over, it will return to the previous mode and volume level. 18 PTY (Program Type) 1. Press PTY/CLK button on the panel to activate the PTY function. The previous PTY type is shown. 2. Press PTY/CLK once again to enter the MUSIC type or press twice to enter the SPEECH type, then use buttons 1 - 6 to select the desired program type (see the following table). Preset number PTY music group 1 POP M, ROCK M 2 EAST M, LIGHT M 3 CLASSICS, OTHER M 4 JAZZ M, COUNTRY M 5 NATION M, OLDIES M 6 FOLK M Preset number PTY speech group 1 NEWS, AFFAIRS, INFO 2 SPORT, EDUCATE, DRAMA 3 CULTURE, SCIENCE, VARIED 4 WEATHER, FINANCE, CHILDREN 5 SOCIAL, RELIGION, PHONE IN 6 TRAVEL, LEISURE, DOCUMENT 3. When PTY is selected, the radio starts to search corresponding PTY information, and stops if the corresponding PTY information is detected. 4. If there are no keys entered for 2 seconds, previously selected PTY is searched. During 1 loop, if desired PTY is not found, NO PTY is flashed, then return to previous normal radio and PTY word disappears. 5. Press PTY button for the 3rd time to switch the PTY function off. Other settings Press and hold SEL button to enter the menu mode. Press it repeatedly to choose the needed item: MASK DPI/ALL => TA SEEK/ALARM => RETUNE L/S. • TA (Traffic Announcement) mode To determine what action will the radio take if the newly tuned station does not receive TP (Transport Program) inf...