valutazioni - 4, GPA: 4.5
(
)
)
|
Facilità d'uso
All are designed for the easiest possible use, but many are not self-explanatory. This operation manual is intended to help you benefit fully from their potential and to maximize your listening enjoyment. We recommend that you familiarize yourself with the functions and their operation by reading through the manual before you begin using this product. It is especially important that you read and observe the" precaution" on the next page and in other sections. In this operation manual, the Basic Operation for each sound source is outlined at the beginning of its explanation, covering simple operation for that source, such as merely playing music. BASIC OPERATION 1. REL BUTTON Press it to detach the front panel when you want to take the front panel away. 2.8. SEL (AUDIO MODE SELECT)/+/- BUTTONS Press SEL button to change the mode in the sequence of A. The volume level can be adjusted at any time by pressing the audio level + or - button as select mode has been initially defaulted at volume mode. B. The volume level is also obtained by stepping through the SEL button until the function VOL is displayed and then press + or - button to adjust the sound level. C. Press and hold the + or - button to adjust the sound level. D. Adjust sound balance between front and rear speakers by using + and - buttons. 3. CLOCK BUTTON Press it to display time on LCD for few seconds. Press it hold and then press or button to adjust hour or minute. 4. MUTE BUTTON Press it to eliminate the sound immediately. 5. TRACK UP/DOWN BUTTONS During CD mode, press A button allow you to track forwards. Hold the v button allow you to skip forwards. > vol -> BAS (Volume) (Bass) > TRE -> BAL -> FAD (Treble) (Balance) (Fader) 3 3607-3.qxd 26.08.2004 9:53 Page 6 e During RADIO mode, press and hold A or v for more than 2 seconds you can auto search channel. Then press A or v you can have manual search channel. 6. EJECT BUTTON Press it to eject the CD DISC. 7. ST BUTTON Press it to select Mono or Stereo sound. 9. BAND BUTTON Press it to select your desired radio band and the band which is selected will be displayed on LCD. Press it hold for more than 2 seconds can have LOUD mode. LOUD MODE: When reduce the volume to half level, press it to enhance the bass effect. 10. MODE BUTTON Press it repeatedly to select CDP, AUX and RADIO mode in sequence and circulation. For SUBWOOFER function (optional), press and hold for more than 2 seconds can have WOOFER Mode. 11. SCAN BUTTON Press it to scan up by one channel step with station detection. If a valid signal has detected, the current frequency is blinked within 5 seconds, then press it again to stop scan and remain the current frequency; otherwise, the unit continue to scan up by one channel step with station detection 5 seconds later. 12-13-14-15-16-17. PRESET MEMORY BUTTONS A. To memorize the current frequency, press any one of the six preset buttons hold for more than 2 seconds. B. To recall the preset memory, press one of the preset buttons [0-6]. C. RADIO MODE When pressed short, these keys select a preset station directly. When pressed longer than one seconds, current station is stored in preset memory bank. D. In CDP mode, press 1PAU button to pause CDP playing, press it again to resume CDP playing. E. In CDP mode, press 2SCN button to play the first 10 seconds part of each song, press it again to stop scanning and retain playing the song currently selected. F. In CD...