valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Rotate and hold the control until you locate the specific point in a track, then release it to start playback. •Tune in stations automatically. Rotate and hold the control to find a specific station. By pushing in and rotating the control (the PRESET/DISC control) Push in and rotate the control to: •Receive the stations memorised on the number buttons. •Change the disc. Other operations Rotate the VOL control to adjust the volume. OFF Press (OFF) to turn off the unit. Press (ATT) to attenuate the sound. Press (SOUND) to adjust the volume and sound menu. Press (DSPL) to display the memorised names. Tip If your car has no ACC (accessory) position on the ignition key switch, be sure to press (OFF) for two seconds to turn off the clock indication after turning off the engine. Changing the operative direction The operative direction of controls is factory- set as shown below. To increase To decrease If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Press (SOUND) for two seconds while pushing the VOL control. Tip You can also change the operative direction of these controls with the unit (see “Changing the sound and display settings” on page 20). Adjusting the sound characteristics You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels independently for each source. 1 Select the item you want to adjust by pressing (SOUND) repeatedly. Each time you press (SOUND), the item changes as follows: BAS (bass) t TRE (treble) t BAL (left-right) t FAD (front-rear) 2 Adjust the selected item by pressing either side of (SEEK/AMS). When adjusting with the rotary commander, press (SOUND) and rotate the VOL control. Note Adjust within three seconds after selecting the item. Attenuating the sound (with the rotary commander-optional) Press (ATT) on the rotary commander. “ATT-ON” flashes momentarily. To restore the previous volume level, press (ATT) again. Tip When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). (CDX-4000RX/4000RV/ 4000R only) Changing the sound and display settings The following items can be set: SET (setting) •CLOCK (page 7) •CT (Clock Time) (page 17) •BEEP — to turn the beeps on or off. •RM (Rotary Commander) — to change the operative direction of the controls of the rotary commander. — Select “NORM” to use the rotary commamder as the factory-set position. — Select “REV” when you mount the rotary commander on the right side of the steering column. DIS (display) •AMBER/GREEN — to change the illumination colour to amber or green. (CDX-400...
Questo manuale è adatto anche per i modelli :Unità - CDX-4000R (1 mb)
Unità - CDX-4000RV (1 mb)
Unità - CDX-4000RX (1 mb)