Log:
valutazioni - 4, GPA: 4 ( )

Istruzioni per l'uso Sony, Modello XR-L210

Produttore : Sony
File Size : 1.04 mb
File Nome :
Lingua di insegnamento: ruplentrskcs
Vai a scaricare



Facilità d'uso


15 Changing the sound and display settings..... 15 Boosting the bass sound — D-bass....................................................... 16 Selecting the sound position — “My Best sound Position” ..................... 16 With Optional Equipment CD/MD Unit (XR-CA300/CA310 only) Playing a CD or MD......................................... 17 Playing tracks repeatedly — Repeat Play.............................................. 18 Playing tracks in random order — Shuffle Play.............................................. 18 Additional Information Maintenance....................................................... 19 Dismounting the unit....................................... 20 Specifications..................................................... 21 Troubleshooting guide..................................... 22 4 Location of controls D El BE! El □ BIO BEE EBEElEElm Refer to the pages listed for details. Q Volume +/- button 7 2 MODE button During radio reception: BAND select 8, 9 During CD/MD playback*: CD/MD unit select 17 3 XR-CA300/CA310: SOURCE (TUNER/CD/MD) button 8, 9, 17 XR-L200/L210: TUNER button 8, 9 □ SEL (select) button 7, 14, 15, 16, 17 5 Z (eject) button 7, 8, 9, 17 6 Display window Q ^m/^- (fast winding)/DIR (tape transport direction change) buttons 7, 8 8 MBP (My Best sound Position) button 16 9 D-BASS button 16 D® SEEK/AMS +/- button 9, 11, 14, 18 Seek 9 Automatic Music Sensor* 18 Manual search* 18 DD RELEASE (front panel release) button 6, 19 DS ATT (attenuate) button 15 Dd SENS/BTM button 8, 9, 13 Df RESET button (located on the front side of the unit behind the front panel) 6 Dg AF button 10, 11, 13 Dh Number buttons 8, 9, 14, 15, 18 During radio reception: Preset number select 9, 11 During tape playback: CD ATA 8 During CD/MD playback*: CD DISC - 18 (D DISC + 18 (D REP 18 (4) SHUF 18 D9 TA button 12, 13 Dk PTY (programme type) button 14 EH DSPL (display mode change) button 7, 10, 17 WS OFF button** 6 * XR-CA300/CA310 only ** Warning when installing in a car without ACC (accessory) position on the ignition key switch Be sure to press (off) on the unit for two seconds to turn off the clock display after turning off the engine. When you press (OFF) momentarily, the clock display does not turn off and this causes battery wear. 5 Getting Started Resetting the unit Before operating the unit for the first time or after replacing the car battery, you must reset the unit. Remove the front panel and press the RESET button with a pointed object, such as a ballpoint pen. □ RESET button Note Pressing the RESET button will erase the clock setting and some memorized functions. Detaching the front panel You can detach the front panel of this unit to protect the unit from being stolen. 1 Press (off). 2 Press (release), then slide the front panel a little to the left, and pull it off towards you. Attaching the front panel Attach part ® of the front panel to part ® of the unit as illustrated and push the left side into position until it clicks. Notes • Be sure not to attach the front panel upside down. • Do not press the front panel too hard against the unit when attaching it. • Do not press too hard or put excessive pressure on the display window of the front panel. • Do not expose the front panel to direct sunlight or heat sources such as hot air ducts, and do not leave it in a humid place. Never leave it on the dashboard of a car parked in direct sunlight or where there may be a considerable rise in temperature. Caution alarm If you turn the car ignition off without removing the front panel, the caution alarm will beep for a few seconds. If you connect an optional power amplifier and do not use the built-in amplifier, the beep sound will be deactivated. Notes • Be sure not to drop the panel when detaching it from the unit. • If you detach the panel while the unit is still turned on, the power will turn off automatically to prevent the speakers from being damaged. • When carrying the front panel with you, use the supplied front panel case. 6 Setting the clock The clock uses a 24-hour digital indication. Example: To set the clock to 10:08 1 Press (dspl) for two seconds. jFT -mrt -MM The hour indication flashes. o Press either side of the volume button to set the hour. to go forward to go back 5ET -irifnm HLHULt Press (SEL). ' 1 \ ' 5ET iràniir lUyiLÇ The minute indication flashes. e Press either side of the volume button to set the minute. tm-ntn ¡mua The clock starts. After the clock setting is complete, the display returns to normal playback mode. Cassette Player Listening to a tape Insert a cassette. Playback starts automatically. The side facing up is played. FUI! THPE \m D-BMI The side facing down is played. RE I1 THPE \B D-MB Tip To change the tape's playback direction, press and To stop playback and eject the cassette Press Z. Fast-winding the tape During playback, press or Direction...

Questo manuale è adatto anche per i modelli :
Unità - XR-CA300 (1.04 mb)
Unità - XR-CA310 (1.04 mb)
Unità - XR-L200 (1.04 mb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie