valutazioni - 0, GPA: 0
(
)
)
|
da questo dispositivo ha anche altre istruzioni :
Facilità d'uso
Parts list The bracket . is attached to the unit before shipping. Before mounting the unit, use the release keys . to remove the bracket . from the unit. For details, see “Removing the bracket (.)” on the reverse side of the sheet. Connection diagram . To AMP REMOTE IN of an optional power amplifier This connection is only for amplifiers. Connecting any other system may damage the unit. . To the parking brake switch cord The mounting position of the parking brake switch cord depends on your car. For details, see “Connecting the parking brake lead (.)” on the reverse side. . To an auxiliary device such as a portable media player, game console, etc. (not supplied) Tip You can use an RCA pin cord (not supplied) to connect auxiliary devices. . To the +12 V power terminal of the car’s rear lamp lead (only when connecting the rear view camera) Warning If you have a power antenna (aerial) without a relay box, connecting this unit with the supplied power supply connection cable . may damage the antenna (aerial). Notes on the control and power supply leads ..The power antenna (aerial) control lead (blue) supplies +12 V DC when you turn on the tuner, or when you activate the AF (Alternative Frequency) or TA (Traffic Announcement) function. ..If your car has a built-in FM/MW/LW antenna (aerial) in the rear/ side glass, connect the power antenna (aerial) control lead (blue) or the accessory power supply lead (red) to the power terminal of the antenna (aerial) booster. For details, consult your car dealer. ..A power antenna (aerial) without a relay box cannot be used with this unit. Memory hold connection When the yellow power supply lead is connected, power will always be supplied to the memory circuit even when the ignition switch is turned off. Notes on speaker connection ..Before connecting the speakers, turn the unit off. ..Use speakers with an impedance of 4 to 8 ohms, and with adequate power handling capacities to avoid damage. ..Do not connect the speaker terminals to the car chassis, or connect the terminals of the right speakers with those of the left speakers. ..Do not connect the ground (earth) lead of this unit to the negative (–) terminal of a speaker. ..Do not attempt to connect the speakers in parallel. ..Connect only passive speakers. Connecting active speakers (with built-in amplifiers) to the speaker terminals may damage the unit. ..To avoid a malfunction, do not use the built-in speaker leads installed in your car if they feature a common negative (–) lead for the right and left speakers. ..Do not connect the unit’s speaker leads to each other. Notes on connection ..If [Check Audio Output Wiring] appears in the display, make sure the speaker and amplifier are connected correctly. ..To use the monitor for the rear seats, connect the parking brake switch cord to the ground (earth). Espanol Precauciones ..Conecte todos los cables de conexion a masa a un punto co...