valutazioni - 4, GPA: 3.5
(
)
)
|
Facilità d'uso
10. Note: The first time you access the Gateway, your radio may display “DEV INIT” while the device is initializing. If this is displayed, please wait one minute then cycle the ignition off and on. Then access SAT mode again to begin normal Gateway operation. Non-Navigation Radios 6. Sirius Satellite Radio Operation Entering Mode Select MenuPress the “BAND” button a few times until “XM” is displayed on the screen. Immediately turn the rotary TUNE KNOB in the top right hand corner to scroll through available sources. Once “SIRIUS” is displayed, press the “FWD>>” button to select the displayed mode. Channel Up Turn the rotary TUNE KNOB clockwise to move up through the channels Channel Down Turn the rotary TUNE KNOB counter-clockwise to move down through the channels Category SelectionPress the “CAT” button then press the button that corresponds with the Category you wish to select. Store Presets Press and hold the preset button on which you want to store the channel. Please Note: If you are using the Media Gateway to add Sirius but still have factory XM installed, it is important to keep the presets in seperate banks. Recall Presets Press the preset button that corresponds with the channel you want to recall. Changing Display: Press the “i” button to display artist and track information Steering Wheel Controls Press the “^” button to cycle up through the categories. Press the “Ў” button to cycle down through the categories. Press the “>I” button to move up through the channels. 7. Selecting AUX Input Entering Mode Select MenuPress the “BAND” button a few times until “XM” is displayed on the screen. Immediately turn the rotary TUNE KNOB in the top right hand corner to scroll through available sources. Once “AUX 1” is displayed, press the “FWD>>” button to select the displayed mode. Navigation Radios 8. Sirius Satellite Radio Operation Entering Mode Select Menu Press the “XM” icon on the navigation screen. Immediately turn the rotary TUNE KNOB in the top right hand corner to scroll through available sources. Once “SIRIUS” is displayed, press the “>” icon on the screen to select the displayed mode. Channel Up Turn the rotary TUNE KNOB clockwise to move up through the channels. Channel Down Turn the rotary TUNE KNOB counter-clockwise to move down through the channels. Category Selection Press the “Browse” icon then press the icon that corresponds with the Category you wish to select. Store Presets Press and hold the preset button on which you want to store the channel. Please Note: If you are using the Media Gateway to add Sirius but still have factory XM installed, it is important to keep the presets in seperate banks. Recall Presets Press the preset button that corresponds with the channel you want to recall. Changing Display: Press the “i” button to display artist and track information Steering Wheel Controls Press the “^” button to cycle up through the categories. Press the “Ў” button to cycle down through the categories. Press the “>I” button to move up to through the channels. 9. Selecting AUX Input Entering Mode Select MenuPress the “XM” icon on the navigation screen. Immediately turn the rotary TUNE KNOB to scroll through available sources. Once “AUX 1” is displayed, press the “>” icon on the screen to select the displayed mode.. 10. Troubleshooting Symptom Cause Remedy The Media Gateway doesnot recognize theSatellite Radio Tuner (SCC1) The Satellite Tuner was not properlyconnected when the PXAMG was first connected and initialized. HDRT must be connected before the PXAMG is powered on. Disconnect the PXAMG from the vehicles harness for 5 minutes. Verify the 8 pin DIN HDRT cable is securely connected at both ends before reconnecting thevehicle harness. Radio shows “DEV INIT” Gateway device isinitializing This only occurs the first time thePXAMG is powered on. Wait a few minutes, cycle ignition off and on then enter SAT Mode. 11. Warranty One Year Limited Warranty The quality controls used in the manufacture of this product will ensure your satisfaction. This warranty applies only to the original purchaser of this product from an authorized iSimple® dealer. This warranty covers any supplied or manufactured parts of this product that, upon inspection by iSimple® authorized personnel, is found to have failed in normal use due to defects in material or workmanship. This warranty does not apply to installation expenses. Attempting to service or modify this unit, operating this unit under conditions other than the recommended voltage will render this WARRANTY VOID. Unless otherwise prescribed by law, iSimple® shall not be liable for any personal injury, property damage and or any incidental or consequential damages of any kind (including water damage) resulting from malfunctions, defects, misuse, improper installation or alteration of this product. All parts of this iSimple® product are guaranteed for a period of 1 year as follows: Within the first 12 months from date of purchase, subject to the conditions abov...