valutazioni - 4, GPA: 3.3
(
)
)
|
Facilità d'uso
18 Using for the first time ........... 19 Using the interior light .................... 19 Changing the light bulb ................. 20 Light bulb specifications ................ 20 Wiring ........................................... 20 Monitor connection ........................ 20 Installing the monitor...................... 21 Operation ............................... 22 Opening the monitor ...................... 22 Repositioning the monitor .............. 22 Closing the monitor ....................... 22 Switching on the monitor ............... 22 Display controls ............................. 23 Remote control .............................. 23 OSD menu .................................... 24 Specifications ........................ 26 Guarantee .............................. 27 Appendix ................................ 27 Changing the battery in the remote control ............................... 27 16 NOTES FOR THE USER Notes for the user Please observe all the warning notices, precautionary measures and maintenance tips contained in these operating instructions so as to extend the life of your monitor. . To avoid causing a road accident, never use the monitor during the journey. . Do not place the monitor’s aerial in the following positions: 1. Positions in which the driver’s view could be restricted. 2. Positions in which the aerial could become a danger to safety (e.g. handbrake, steering wheel, gearshift lever and airbag). . Do not install the aerial in locations where it could restrict the driver’s rear view. Do not allow the aerial to jut out past the side of the vehicle. . Attach the aerial carefully so that you do not loose it whilst driving, particularly in the rain or in the car- wash. . To avoid the danger of receiving an electric shock and damaged to the monitor, make sure that the monitor cannot become wet or moist. If, however, this does occur, switch the device off, disconnect the electrical cable, and take the monitor to your local specialised dealer as quickly as possible or send it in to our customer service centre. . Only operate the device with the recommended electrical supply of 12V direct current. . Make sure you do not place or hang any objects on the electrical cable since this could damage it. . Avoid laying the cable haphazardly or twisting it. Keep it away from heated objects. . Do not attempt to repair the electrical cable if it becomes damaged or severed – instead, replace it immediately with a new one. . Make sure that no metallic or inflammable objects make their way into the monitor’s insides through the ventilation slots. . Do not attempt to open or dismantle the monitor, since you could suffer an electric shock as a result. . If you detect smoke or a strange smell, disconnect the electrical cable immediately and take it to your local specialised dealer or send it in to our customer service centre. . If the monitor’s housing is damaged or broken, take it to your local specialised dealer or send it in to our customer service centre. . Avoid using the monitor in places where it is subjected to dust, dirt or moisture. . Do not install the monitor in places where it is subjected to direct sunlight or extreme temperatures. ENGLISH 17 NOTES FOR THE USER SUPPLIED EQUIPMENT . Do not subject the monitor to the wet or moisture. . After installing the monitor, avoid knocking it or pulling it downwards excessively, since this will loosen the screws and the monitor could drop off. Supplied equipment The monitor is supplied with all parts listed below. Please check that your device is supplied with all the parts. If one of the listed parts is missing, please contact your dealer immediately. Standard package . Monitor (including mounting fixture) . Remote control with battery . 500 cm long, 8-pin system cable (only for AV signal converter) . Guarantee card . Operating instructions USING FOR THE FIRST TIME Using for the first time Using the interior light There are three settings for the interior light: OFF, DOOR and ON (see diagram below). OFF: The lights are switched off. DOOR: With this setting, the lights only come on when the vehicle’s doors are opened. ON: The lights are switched on. Notes: . There is no electrical cable connected to position “B”, since “B” is connected to the ground via two screws. . The power supply must be 12 volts. ENGLISH OFF DOOR ON Circuit diagra W = White = Connection to the sensor B = Black = Ground R = Red = Electrical connection 19 USING FOR THE FIRST TIME Changing the light bulb To fit a new bulb, proceed as follows: . Set the light switch to “OFF”. . Push back the bulb cover and open it (see diagram below). . Remove the old bulb and dispose of it. . Fit a new bulb. . Close the bulb cover. Bulb cover Light bulb Light bulb specifications Diameter: 8 mm Length: 29 mm Voltage: 12 V direct current, 5 W Type: Stanley A3022C or a type with the same specifications Wiring Bulb for the main unit Light cable for the main unit Screws Connecting cable Red = Elect...