To preview numbers before dialing, enter numbers first, then press PHONE to dial. Press V at any time to make corrections as you are entering numbers. Base Speakerphone calls To answer an incoming call, press @SPEAKERPHONE, ( or 0-9, #, or * ). To make a call, press @SPEAKERPHONE, then dial a number. Press @SPEAKERPHONE again to hang up. Speed dialing & directory dialing Base: To use speed dialing, press @SPEAKERPHONE, press @MEM, then enter the one-digit speed-dial number (0-9) you want to call

Please read Part 1 – Important Product Information, included in this package. Part 2 © 1998 Philips Consumer Communications L.P. All rights reserved. Printed in China. 848230066 Issue 1AT&T I N S T A L L A T I O N 1 Insert the microcassette. Slide the cover down and insert the microcassette with the full reel at the bottom. Replace the cover. 1 2 Connect the line cord. Plug the line cord into a modular wall jack. 3 Connect a telephone (optional). Plug the line cord from the telephone into the TE

See Caller ID Operation, beginning on page 23, for more details about how these features work. Telephone operating range This cordless telephone operates with the maximum power allowed by the Federal Communications Commission (FCC). Even so, this handset and base can communicate over only a certain distance — which can vary with the locations of the base and handset, the weather, and the construction of your home or office. For best performance, keep the base antenna fully upright. If you receiv

Part 2 © 1998 Philips Consumer Communication L.P. All rights reserved. Printed in Mexico. 848230124 Issue 1AT&T IN CASE OF DIFFICULTY If this answering system does not work properly, try the following suggestions. If you’re still having difficulty, call 1 800 722-9125. Message Window Is Blank • Make sure the power cord is securely connected to both the answering system and an electrical outlet not controlled by a wall switch. ! Use only the power cord supplied with this product. For a replacemen

O P E R A T I O N 3 Fold open this manual for information about this product’s installation and operation. Please read Part 1 – Important Product Information, included in this package. User’s Manual for Tapeless Digital Answering System with Time/Day 1717 1 Part 2 © 1998 Lucent Technologies Consumer Products L.P. All rights reserved. Printed in Mexico. 848230009 Issue 3AT&T REVISED 1/15/99 AT&T 1717 panels_3ATT 1 1/15/99, 1:40 PM OPERATION Announcement Monitor Saving Messages You can choose whet

Please also read Part 1 – Important Product Information. AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones. © 2001 Advanced American Telephones. All rights reserved. Printed in China. 850005063 Issue 1AT&T 01/01 INSTALLATION Before You Install Choose a location for the answering system near a modular telephone jack and a standard electrical outlet not controlled by a wall switch. NOTE: If you do not want to connect a telephone, skip Step 2

AT&T and the Globe Design are trademarks of AT&T Corp. licensed to Advanced American Telephones. Printed in China. Issue 1AT&T 12/02 Visit us at USER’S MANUAL Part 2 1719 Digital Answering System Fold open this manual for information about this product’s installation and operation. Please also read Part 1 – Important Product Information. AT&T and the Globe Design are trademarks of AT&T Corp. licensed to Advanced American Telephones. © 2002 Advanced American Telephones.All rights reserved. Printe

After the beep, the system begins recording your caller’s message. A caller can leave a message up to three minutes long. If the message is longer than three minutes, or if the caller is silent for more than seven seconds, or if the system runs out of memory, the system beeps once and hangs up. Callers can skip over your announcement by pressing #. Call Screening/Intercept Set the system to answer calls, and set the volume control so you can hear the caller’s message. If you choose not to hear t

Please also read Part 1 – Important Product Information. AT&T and the globe symbol are registered trademarks of AT&T Corp. licensed to Advanced American Telephones. © 2000 Advanced American Telephones. All rights reserved. Printed in Mexico. 850002650 Issue 1AT&T 5/00 INSTALLATION 1 Connect the line cord. Plug one end of the telephone line cord into the jack labeled TEL LINE on the back of the system. Plug the other end into a phone wall jack. 2 Connect the telephone. NOTE: If you do not want to

After this, if you subscribe to Caller ID, the system will automatically reset the clock each time new call information is received. (There is a fee for Caller ID service, and it may not be available in all areas.) Press b to exit at any time while setting the clock. 1 Press and hold C until the default day is announced. 2 To change the day setting, hold down or until the correct day is announced. Then release the button. 3 Press and release C. The current hour setting is announced. 4 Repeat Ste