valutazioni - 2, GPA: 4 ( )

Produttore : Legacy Car Audio File Size : 665.44 kb File Nome : c009da96-4a22-4d89-ab17-b87e1abd918e.pdf Lingua di insegnamento:

Speaker Terminals 1 12 Plug in the Remote Bass Boost Control wire in here. 13 Remote Bass Boost LA-978 2CH amplifier 2 X 100W 2 X 150W 2 X 600W 1 X 1200W 2-4 OHMS 4-8 OHMS 30 A 12.2 X 2 X 13.5 (309 X 53 X 343) 8.2(3.73) LA-1478 2CH amplifier 2 X 125W 2 X 200W 2 X 800W 1 X 1600W 2-4 OHMS 4-8 OHMS 30 A 12.2 X 2 X 15 (309 X 53 X 381) 8.8 (4.0) LA-1878 2CH amplifier 2 X 150W 2 X 225W 2 X 1000W 1 X 2000W 2-4 OHMS 4-8 OHMS 40 A 12.2 X 2 X 17 (309 X 53 X 432) 10.1 (4.62) LA-2078 2CH amplifier 2 X 200W 2 X 300W 2 X 1200W 1 X 2400W 2-4 OHMS 4-8 OHMS 50 A 12.2 X 2 X 19 (309 X 53 X 482) 11.4 (5.2) LA-2278 2CH amplifier 2 X 300W 2 X 450W 2 X 2000W 1 X 4000W 2-4 OHMS 4-8 OHMS 70 A 12.2 X 2 X 21 (309 X 53 X 532) 12.8 (5.8) LA-2478 Mono channel amplifier 200W mono 335W mono 2000W mono 20-250Hz( 3dB) 10 k-Ohms 100 Ohms 250 mV 4V 14.4 VDC/NEG GD (10.5-16V) 2 OHM STABLE 40 A 12.2 X 2 X 12 (309 X 53 X 305) 7.3 (3.34) specsFeatures and Specifications 10Hz-30 kHz 10 k-Ohms 100 Ohms 250 mV 2.5V 14.4 VDC/NEG GD (10.5-16V) Specifications OUTPUT POWER RMS @ 4 OHMS RMS @ 2 OHMS MAX OUTPUT BRIDGE MODE FREQUENCY RESPONSE INPUT IMPEDANCE LOW LEVEL INPUTS HIGH LEVEL INPUTS INPUT SENSITIVITY LOW LEVEL INPUTS HIGH LEVEL INPUTS POWER SUPPLY VOLTAGE MATCHING SPEAKER IMPEDANCE STEREO MODE BRIDGED MODE MAXIMUM CURRENT DRAW DIMENSIONS, W x H x L, inches (mm) NET WEIGHT, LBS (KG) LA-478/578/778/978/1478/1878/2078/2278 Features and Controls 10 9 8 7 6 5 4 3 2 1 Speaker Terminals These terminals are 14K Gold plated for high conductivity and minimum impedance loss. The terminals face upwards for easy wiring in tight situations. Fuse Protects the amplifier as well as the automobile electrical system from short circuit conditions. Power Supply Terminals Input Level Control Use this control to match the output of the head unit to the amplifier. If distortion is present, reduce the setting of this control. Crossover Mode Switch In a full range system, set this to FULL. If the amp is being used to power a crossover system, set to either HPF or LPF as needed. Bass Boost Control Allows you to increase the bass signal level sent to the speakers Low Pass Control Permits you to adjust the crossover frequency from 35 Hz to 400 Hz to suit the subwoofers High Pass Control Permits you to adjust the crossover frequency from 80 Hz to 2.5 kHz to suit the tweeters High Level Input (Low Impedance) Use these if your car stereo does not have RCA output jacks: connect the speaker output from the head unit to these inputs Low Level Input (High Impedance) This unit is provided with gold-plated RCA input jacks. Using RCA-RCA type patch cords, connect these inputs to the RCA outputs from your head unit. Power LED Indicator This LED is illuminated when the REMOTE ON system is turned on. 1112 Protection LED Indicator The protection circuitry in the amp will disable it if it senses an input overload, speaker short circuit, or thermal overload conditions. Should this occur, the PROTECT LED will be illuminated. At th...

Scarica la tua

Per scaricare, digitare 2 cifre :