Log:
valutazioni - 1, GPA: 5 ( )

Istruzioni per l'uso PYLE Audio, Modello PLMRA120

Produttore : PYLE Audio
File Size : 390.05 kb
File Nome : plmra120.pdf
Lingua di insegnamento: en
Vai a scaricare



Facilità d'uso


Couple the RCA input with the car stereo or equalizer outputs using RCA type connector cables. 5. POWER FUSE Power fuse protects both this amplifier and the automobile electrical system from wrong electrical conditions. 6.POWR SUPPLY TERMINAL Connect the +12V DC power supply into the terminal by lugs and screws accessible at the panel of this amplifier. A.BATT +12V Connect +12V DC power supply wire into the terminal from the terminal of the battery. B.GROUND Ground terminal connect the ground wire to the chassis of the automobile. C.REMOTE Remote terminal connects the control wire which provides remote turn-on and off of the amplifier by the radio/cassette play or equalizer. 7. SCREW TYPE SPEAKERS CONNECTOR You may use either 4 or 8 ohm speakers in pair. 2 з B. LOW IMPEDANCE INPUT CONNECTION PDI NOTE: THE ABOVE TYPES OF INPUT MUST BE USED INDEPENDENTLY. DO NOT CONNECT MORE THAN ONE INPUT AT THE SAME TIME. 4 C. SPEAKERS AND POWER CONNECTION eir 'T Eïï3 ‘if "ïï3 T3 cif MAIN POWER LEAD (TOCAR BATTERY POSITIVE TERMINAL) GROUND LEAD (CONNECT TO A WELL GROUNDED METALLIC PART OF YOUR CAR) REMOTE SWITCH (CONNECT POWER ANT(ACC) LEAD WIRE OF YOUR CAR STEREO) RIGHT SPEAKER ( 4 or 8 ohm ) LEFT SPEAKER ( 4 or 8 ohm ) TECHNICAL SPECIFICATIONS: Power Supply.........................................................................12V DC (11-16V) Negative Ground Current Consumption...............................................................................................................5A Speaker Impedance.......................................................................................................4-8 ohms Total Harmonic Distortion...........................................................................0.05 % 20W At 1KHz Signal to Noise Ratio........................................................................................More than 80 dB Frequency Response...........................................................................................20 Hz-30 KHz Input Sensivitity Low Level (High Impedance).................................................................300 mV High Level (Low Impedance).....................................................................3.0 V Input Impedance Low Level (High Impedance)............................................................10K ohms High Level (Low Impedance)............................................................100 ohms Output Power.........................................................................................70 Watts x 2 RMS 120 Watts x 2 Maximum Dimensions (W x H x L).......................................................................7.87"W x 2"H x 5.20"L Weight...................................................................................................2.30 (lbs) 5 6 INSTALLATION This amplifier comes complete with mounting hardware, if the unit is used in the line level (high impedance) mode, it is recommended to use gold...

Questo manuale è adatto anche per i modelli :
Avtousiliteli - PLMRA120 (390.05 kb)

Scrivi la tua opinione del dispositivo



Il messaggio
Il tuo nome :
Inserire le due cifre :
capcha





categorie