valutazioni - 4, GPA: 3.3
(
)
)
|
Facilità d'uso
ALWAYS shake fuel container thoroughly before each use. AFTER USE DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container. STORAGE Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight container. Store in a well-ventilated, unoccupied building, away from sparks and flames. EMISSION DATA EMISSION CONTROL (EXHAUST and EVAPORATIVE) EPA 2010 and/or C.A.R.B. TIER III The emission control system for the engine is EM/ TWC (Engine Modification and 3-way Catalyst) and for the fuel tank the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to California models only. An Emission Control Label is located on the engine. (This is an example only, information on label varies by engine family). PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD) The 300 hours emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual. EMISSION CONTROL INFORMATION ENGINE FAMILY: #EHXS.0815RA DISPLACEMENT: 80.7cc EMISSION COMPLIANCE PERIOD: 300Hours THIS ENGINE MEETS U.S.EPA EXH/EVP EMISSION REGULATIONS FOR MODEL YEAR **** REFER TO OWNER’S MANUAL FOR MAINTENANCE SPECIFICATIONS AND ADJUSTMENTS. *** ???? CS-8000 TYPE1-E 13 CS-8000 TYPE1-E 14 Oil tank cap Fuel tank cap Cap indication Oil/fuel tanks are indicated by the following illustrations on the caps. CHAIN LUBRICANT Proper lubrication of the chain while in operation reduces the friction between the chain and the guide bar to a minimum and assures a longer service life. • Use bar and chain oil of high quality for this purpose. • Do not use used or reclaimed oil to avoid various oiler problems. • Use ECHO bar and chain oil. • When ECHO bar and chain oil is not available: Use motor oil, etc. • Use bar and chain oil of the following grades: SAE No. 30 ....... in summer SAE No. 10 ....... in winter or when cutting resinous trees. • When refueling, also refill chain oil. WHEN THE ENGINE IS COLD CAUTION Make sure the bar and chain are free from any obstruction when starting the chain saw. • Move chain brake lever fully forward to lock chain brake before starting. • Fill the fuel tank with fuel mixture. It is not permitted to fill fuel above the shoulder level of fuel tank. • Fill the chain oil tank with lubricant. Do not over fill. • Move ignition switch to “RUN” position. • Pull choke control knob all the way out. (Choke position) • Securely hold the chain saw as shown and pull starter handle several times until first firing sound. • Push choke control knob all the way in. • Pull starter handle to start the engine. • After starting the engine, pull front hand guard towards the operator immediately. (Chain brake unlocked position) OPERATION Choke Choke control knob Start / Run Ignition switch Chain brake Starter handle Unlock chain brake 15 CS-8000 TYPE1-E WHEN THE ENGINE IS WARM • Move chain brake lever fully forward to lock chain brake before starting. • Confirm there is fuel and chain oil in the tanks. • Move ignition switch to “RUN” position. • Securely hold the chain saw as shown and pull starter handle. • Choke may be used if necessary, but be sure to push it back on first firing sound. • After starting the engine, pull front hand guard towards the operator immediately. (Chain brake unlocked position) WHEN THE ENGINE IS HARD TO START CAUTION Make sure the bar and chain are free from any obstruction when starting the chain saw. • Move chain brake lever fully forward to lock chain brake before starting. • Press throttle trigger lockout down while grasping throttle trigger and push in throttle latch. • Move ignition switch to “RUN” position. • Securely hold the chain saw as shown and pull starter handle. • When engine starts, immediately squeeze throttle trigger, to release throttle latch, and pull front hand guard towards the operator immediately. (Chain brake unlocked position) CAUTION The chain will attempt to rotate when engine is started with throttle latch engaged. After engine starts, release throttle trigger to idle engine, otherwise brake damage may occur. Never use throttle latch for cutting. Use it only when starting the engine. Throttle trigger lockout CAUTION 1. When using throttle latch for starting, keep the brake in lock position. 2. After starting the engine, squeeze throttle trigger slightly to release throttle latch and pull front hand guard towards the operator immediately. (Chain brake unlocked position) 3. Do not increase engine speed while chain brake is locked. 4. Use the chain brake only in starting or in emergencies. Push Throttle latch Throttle trigger Open choke Choke control knob Starter handle Chain brake Unlock chain brake Start / Run Ignition...