valutazioni - 3, GPA: 3.7 ( )

Produttore : Little Wonder File Size : 903.11 kb File Nome : Lingua di insegnamento:

A. SAFETY DECALS AND MOLDED SYMBOLS Important parts of the safety system incorporated in both Single Edge and Double Edge trimmers are the warning and informational decals and molded-in symbols found on various parts of the trimmer. These decals must be replaced in time due to abrasion, etc. It is your responsibility to replace the decals or molded housing when they become hard to read. The locations of these safety features are shown below. See page 13 for their part numbers when ordering replacements. 4 B. SAFETY SYMBOLS IDENTIFICATION Single Edge Trimmer Double Edge Trimmer Guard Serial Number decal Side Handle Rear Handle On/Off Switches Loop Handle Guard On/Off Switch On/Off Switch Safety Symbols (Molded into Part No. 310400 Main Housing Set} Rear Handle WHAT THE SYMBOLS MEAN: 1. Read the instructions. 2. Do not expose to rain. 3. Remove plug from main (electric power source) immediately if cable is damaged or cut. 4. Double insulated. 1 2 3 4 WARNING DANGER TO REDUCE THE POTENTIAL FOR ACCIDENTS, COMPLY WITH THE SAFETY INSTRUCTIONS IN THIS MANUAL. FAILURE TO COMPLY MAY RESULT IN SERIOUS PERSONAL INJURY AND OR EQUIPMENT AND PROPERTY DAMAGE. WARNING DANGER THIS SYMBOL POINTS OUT IMPORTANT SAFETY INSTRUCTIONS. WHEN YOU SEE THIS SYMBOL, HEED IT’S WARNING!! STAY ALERT!! ! ! ! ! ! ! ! ! ! C. SPECIAL SAFETY RULES 1. Read and understand the owner’s manual. Pay particular attention to all sections regarding safety. 2. Always keep a firm grip on both handles while the blades are moving and/or the motor is running. On Single Edged units, the right hand grasps the front side handle and the left hand grasps the rear handle. On Double Edged units, one hand grasps the front ‘loop’ handle, while the other hand grasps the rear handle. BE AWARE!! The blades coast after triggers are released or motor is switched off. Make sure blades have come to a complete stop before letting go of a handle. 3. Maintain a firm footing and good balance; do not overreach while trimming. Before you start to trim, check the work area for obstacles that might cause you to lose your footing, balance or control of the machine. 4. Keep area clear of children, pets, and bystanders. D. WARNINGS — DON.TS Don’t use trimmer with one hand, keep both hands on handles with fingers and thumbs encircling the handles, while blades are moving, and motor is running. Don’t overreach or stand on unstable support. Do not stand on the top of a ladder while trimming. Use proper equipment for reaching higher heights. Keep a good footing at all times. Don’t ever grasp cutting blades for any reason. Don’t attempt to clear cut material while blades are moving, and the motor is running. Never try to remove jammed material before switching the motor off and making sure the blades have stopped completely. Don’t over-ride safety features. Don’t allow children or incapable people to operate this trimmer. Don’t operate this hedge trimmer while under the influence of alcohol or drugs. Don’t attempt to repair thi...

Scarica la tua

Per scaricare, digitare 2 cifre :