valutazioni - 2, GPA: 3.5
(
)
)
|
Facilità d'uso
the chain in case of breakage or if it should come out of the bar. It should never be removed. L. Chain sharpening 1 Chain cutter teeth can be sharpened with a round file, as follows: CHAIN FILE MP 370 GLX 5/32” PM 320 GX 3/16” The exact chain type is marked on the bottom half of the drive link which runs inside the bar groove. Filing can be made easier by also using a file holder. The chain can remain fitted on the bar during sharpening. Before commencing, the chain should be tensioned correctly and the chain brake should be activated to prevent the chain from moving. 2 To obtain a correct sharpening the file must be carefully held to maintain 3 basic angles: – “A” Top angle 30° - 35° – “B” External, side angle 85° - 90° – “C” Internal, side angle 60° File in one direction only, from the “inside” of the cutter tooth towards the “outside”. Do not allow the file to touch the chain as you bring it back to re-position it. Each cutter tooth should be filed with the same number of strokes. 3 The file should be held horizontally to the cutter tooth being sharpened. 4 Best results to obtain a precise sideways angle can be obtained by holding the file so that it rises 0,5 mm above the top face of the cutter tooth. 5 DEPTH GAUGE Correct depth gauge height is vital to ensure maximum chain life and cutting efficiency. The height of the depth gauge should be lowered as the cutter tooth is filed back; this height should be checked every 4 or 5 sharpenings. The best way to do this is to use a flat file and a depth gauge tool. The correct setting is 0.65 mm below the top edge of the cutter tooth. The cutter tooth depth gauge should then be rounded (D). Specification THIS PRODUCT MEETS THE SAFETY STANDARD REQUIREMENT OF THE EUROPEAN MACHINERY DIRECTIVE DISPLACEMENT (cm3) 38 40 42 46 BORE AND STROKE (mm) 40x30 41x30 41x32 43x32 ENGINE OUTPUT (kW) (ISO 7293) 1,5 1,75 2 2,4 ENGINE SPEED AT MAX POWER (min-1) 8.500 8.500 9.000 9.000 MAXIMUM SPEED (min-1) 11.000 11.000 12.000 11.000 MINIMUM SPEED (min-1) 2.800 2.800 2.800 2.800 DRY WEIGHT (Kg) (NO BAR AND CHAIN) 5 5 5,5 5,5 CHAIN PITCH (9,525 -8,255 mm) 3/8” .325” 3/8”-.325” 3/8”-.325” CHAIN GAUGE (mm) 1,3 1,3 1,3 1,3 BAR LENGTHS (cm) 35/40/45 40/45 40/45 40/45 No. OF SPROCKET TEETH 6 7 6/7 6/7 OIL TANK CAPACITY (cm3) 290 290 290 290 FUEL TANK CAPACITY (cm3) 390 390 390 390 SOUND PRESSURE LEVEL (AT THE OPERATOR’S EAR). LpAav (dBA) (EN 27182 - EN 608) 97 97 98 98 GUARANTEED SOUND POWER LEVEL LwAav (dBA) (ISO 9207 - EN 608) 112 112 112 113 MEASURED SOUND POWER LEVEL LwAav (dBA) (ISO 9207 - EN 608) 111 111 111 112 VIBRATION LEVEL (ISO 7505 - EN 608) (m/s2) 7,5 8,7 6,9 6,9 EC Declaration of Conformity The undersigned, authorised by E.O.P.I., declares that the petrol-driven chainsaw MS 38E, MS 40E, MS 42E, MS 46E, manufactured by E.O.P.I., 23868 Valmadrera (LC), Via Como 72, Italy, is in accordance with the European Directives 98/37/CEE (Machinery Directive), 73/23/EEC (Low Voltage Directive), 93/68/CEE (CE Marking Directi...
Questo manuale è adatto anche per i modelli :Benzo e seghe - P 540E 40 CC (1.96 mb)
Benzo e seghe - 95390011700 (1.96 mb)
Benzo e seghe - Euromac S42 (1.96 mb)
Benzo e seghe - Euromac S43 42 CC (1.96 mb)