valutazioni - 1, GPA: 5
(
)
)
|
Facilità d'uso
.325 in. Chain gauge................................................................................................................................................................. .050 in. Chain type......................................................................................................................................Low Profile Full Skip Tooth Chain drive links................................................................................................................................................................... 72 Drive sprocket.............................................................................................................................................................. 7-tooth Engine displacement......................................................................................................................................2.8 cu. in. (46cc) Engine power........................................................................................................................................................ 2.2 HP min. Idle engine speed.......................................................................................................................................2,800 - 3,400 RPM Fuel tank capacity....................................................................................................................................................... 20.3 oz. Chain oil tank capacity................................................................................................................................................ 13.5 oz. Weight - No bar, chain, fuel or oil.............................................................................................................................. 10.6 lbs. Fig. 1 Primer bulb Front hand guard/Chain Brake Front handle Cylinder cover Safe-t-tip anti-kickback nose guard CHOKE LEVER bar mounting nuts clutch cover guide bar Rear handle Throttle trigger ignition Switch Fuel cap Starter/Fan housing Starter grip Throttle lock Trigger RELEASE Chain oil cap low kickback saw chain combination wrench FEATURES KNOW yOUR CHAIN SAW See Figure 1. Before attempting to use this product, familiarize yourself with all operating features and safety rules. CHOKE LEVER The choke lever opens and closes the choke valve in the carburetor. Positions available include FULL CHOKE, HALF CHOKE, and RUN. COMbINATION WRENCH A combination wrench tool is provided for use when performing various maintenance procedures. On-board storage keeps the tool handy at all times. FRONT HANd GUARd/CHAIN bRAKE The chain brake is designed to quickly stop the chain from rotating. When the front hand guard/chain brake is pushed toward the bar, the chain should stop immediately. The chain brake does not prevent kickback. GUIdE bAR The factory-equipped guide bar has a small radius tip that offers a somewhat lower kickback potential. LOW KICKbACK SAW CHAIN The low kickback saw chain helps minimize the force of a kickback reaction by preventing the cutters from digging in too deeply at the kickback zone. PRIMER bULb The primer bulb pumps fuel from the fuel tank to the carburetor. SAFE-T-TIP ANTI-KICKbACK NOSE GUARd The SAFE-T-TIP Anti-Kickback Nose Guard is an attachment provided on the end of the guide bar to prevent the chain on the end of the guide bar from contacting the wood. THROTTLE LOCK The throttle lock feature allows you to start the chain saw without having to continuously hold the throttle trigger. THROTTLE TRIGGER The throttle trigger is used for starting the chain saw, and also for controlling chain rotation. WARNING: If any parts are missing do not operate this tool until the missing parts are replaced. Failure to do so could result in possible serious personal injury. WARNING: Do not attempt to modify this tool or create accesso- ries not recommended for use with this tool. Any such alteration or modification is misuse and could result in a hazardous condition leading to possible serious personal injury. NOTE: The chain saw has been fully factory tested. It is normal to find some slight oil residue on the saw. Read and remove all hang tags and store with the Operator’s Manual. UNPACKING This product has been shipped completely assembled. .Carefully remove the tool and any accessories from the box. Make sure that all items listed in the packing list are included. .Inspect the tool carefully to make sure no breakage or damage occurred during shipping. .Do not discard the packing material until you have care- fully inspected and satisfactorily operated the tool. .If any parts are damaged or missing, please call 1-800-242-4672 for assistance. PACKING LIST Chain Saw Scabbard Combination Wrench 2-Cycle Engine Oil ASSEMbLy Operator’s Manual Case Page FUEL ANd REFUELING HANdLING THE FUEL SAFELy WARNING: Check for fuel leaks. If any are found, correct them before using the saw to prevent fire or burn injury. . Always handle fuel with care; it is highly flammable. . A...